NetSight

Sicherheitslage

Ein aktuelles Lagebild zu neuen Schwachstellen, aktiv ausgenutzten Lücken und schädlichen Paketen.

Zurücksetzen
378 passende Meldungen · Seite 11 von 13Index aktualisiert vor 3 Minuten · Abonnieren · RSS
SchweregradIDTitelBetroffenAlter
kritisch9.8 CVE-2002-0639 Integer overflow in sshd in OpenSSH 2.9.9 through 3.3 allows remote attackers to execute arbitrary code during challenge response authentication (ChallengeResp… openbsd · openssh 2002-07-03 hoch7.5 CVE-2002-0557 Vulnerability in OpenBSD 3.0, when using YP with netgroups in the password database, causes (1) rexec or (2) rsh to run another user's shell, or (3) atrun to c… openbsd · openbsd 2002-07-03 kritisch10.0 CVE-2002-0640 Buffer overflow in sshd in OpenSSH 2.3.1 through 3.3 may allow remote attackers to execute arbitrary code via a large number of responses during challenge resp… openbsd · openssh 2002-07-03 hoch7.2 CVE-2002-0572 FreeBSD 4.5 and earlier, and possibly other BSD-based operating systems, allows local users to write to or read from restricted files by closing the file descr… freebsd · freebsd, openbsd · openbsd, sun · solaris +1 2002-07-03 mittel5.0 CVE-2002-0381 The TCP implementation in various BSD operating systems (tcp_input.c) does not properly block connections to broadcast addresses, which could allow remote atta… freebsd · freebsd, netbsd · netbsd, openbsd · openbsd 2002-06-25 hoch7.5 CVE-2002-0575 Buffer overflow in OpenSSH before 2.9.9, and 3.x before 3.2.1, with Kerberos/AFS support and KerberosTgtPassing or AFSTokenPassing enabled, allows remote and l… openbsd · openssh 2002-06-18 kritisch9.8 CVE-2002-0083 Off-by-one error in the channel code of OpenSSH 2.0 through 3.0.2 allows local users or remote malicious servers to gain privileges. immunix · immunix, mandrakesoft · mandrake_single_network_firewall, openbsd · openssh +8 2002-03-15 hoch7.5 CVE-2001-1507 OpenSSH before 3.0.1 with Kerberos V enabled does not properly authenticate users, which could allow remote attackers to login unchallenged. openbsd · openssh 2001-12-31 mittel6.8 CVE-2001-1585 SSH protocol 2 (aka SSH-2) public key authentication in the development snapshot of OpenSSH 2.3.1, available from 2001-01-18 through 2001-02-08, does not perfo… openbsd · openssh 2001-12-31 mittel5.5 CVE-2001-1559 The uipc system calls (uipc_syscalls.c) in OpenBSD 2.9 and 3.0 provide user mode return instead of versus rval kernel mode values to the fdrelease function, wh… openbsd · openbsd 2001-12-31 hoch7.2 CVE-2001-0872 OpenSSH 3.0.1 and earlier with UseLogin enabled does not properly cleanse critical environment variables such as LD_PRELOAD, which allows local users to gain r… openbsd · openssh, redhat · linux, suse · suse_linux 2001-12-21 hoch7.5 CVE-2001-0816 OpenSSH before 2.9.9, when running sftp using sftp-server and using restricted keypairs, allows remote authenticated users to bypass authorized_keys2 command= … openbsd · openssh 2001-12-06 mittel4.6 CVE-2001-1415 vi.recover in OpenBSD before 3.1 allows local users to remove arbitrary zero-byte files such as device nodes. openbsd · openbsd 2001-11-13 hoch7.5 CVE-2001-1380 OpenSSH before 2.9.9, while using keypairs and multiple keys of different types in the ~/.ssh/authorized_keys2 file, may not properly handle the "from" option … openbsd · openssh 2001-10-18 hoch7.5 CVE-2001-0670 Buffer overflow in BSD line printer daemon (in.lpd or lpd) in various BSD-based operating systems allows remote attackers to execute arbitrary code via an inco… bsd · bsd, freebsd · freebsd, netbsd · netbsd +1 2001-10-03 mittel5.0 CVE-2001-1382 The "echo simulation" traffic analysis countermeasure in OpenSSH before 2.9.9p2 sends an additional echo packet after the password and carriage return is enter… openbsd · openssh 2001-09-27 niedrig2.1 CVE-2001-1029 libutil in OpenSSH on FreeBSD 4.4 and earlier does not drop privileges before verifying the capabilities for reading the copyright and welcome files, which all… openbsd · openssh, freebsd · freebsd 2001-09-20 hoch7.5 CVE-2001-0572 The SSH protocols 1 and 2 (aka SSH-2) as implemented in OpenSSH and other packages have various weaknesses which can allow a remote attacker to obtain the foll… openbsd · openssh, ssh · ssh 2001-08-22 mittel6.2 CVE-2001-1145 fts routines in FreeBSD 4.3 and earlier, NetBSD before 1.5.2, and OpenBSD 2.9 and earlier can be forced to change (chdir) into a different directory than inten… freebsd · freebsd, netbsd · netbsd, openbsd · openbsd 2001-08-17 hoch7.2 CVE-2001-0529 OpenSSH version 2.9 and earlier, with X forwarding enabled, allows a local attacker to delete any file named 'cookies' via a symlink attack. openbsd · openssh 2001-08-14 kritisch10.0 CVE-2001-0554 Buffer overflow in BSD-based telnetd telnet daemon on various operating systems allows remote attackers to execute arbitrary commands via a set of options incl… mit · kerberos, mit · kerberos_5, netkit · linux_netkit +8 2001-08-14 mittel5.0 CVE-2001-1244 Multiple TCP implementations could allow remote attackers to cause a denial of service (bandwidth and CPU exhaustion) by setting the maximum segment size (MSS)… freebsd · freebsd, hp · hp-ux, hp · vvos +6 2001-07-07 mittel4.0 CVE-2001-0361 Implementations of SSH version 1.5, including (1) OpenSSH up to version 2.3.0, (2) AppGate, and (3) ssh-1 up to version 1.2.31, in certain configurations, allo… openbsd · openssh, ssh · ssh 2001-06-27 niedrig2.1 CVE-2001-0378 readline prior to 4.1, in OpenBSD 2.8 and earlier, creates history files with insecure permissions, which allows a local attacker to recover potentially sensit… openbsd · openbsd 2001-06-27 hoch7.5 CVE-2001-1459 OpenSSH 2.9 and earlier does not initiate a Pluggable Authentication Module (PAM) session if commands are executed with no pty, which allows local users to byp… openbsd · openssh 2001-06-19 kritisch10.0 CVE-2001-0247 Buffer overflows in BSD-based FTP servers allows remote attackers to execute arbitrary commands via a long pattern string containing a {} sequence, as seen in … mit · kerberos_5, sgi · irix, freebsd · freebsd +2 2001-06-18 hoch7.5 CVE-2001-0402 IPFilter 3.4.16 and earlier does not include sufficient session information in its cache, which allows remote attackers to bypass access restrictions by sendin… darren_reed · ipfilter, freebsd · freebsd, openbsd · openbsd 2001-06-18 niedrig1.2 CVE-2001-1047 Race condition in OpenBSD VFS allows local users to cause a denial of service (kernel panic) by (1) creating a pipe in one thread and causing another thread to… openbsd · openbsd 2001-06-02 kritisch10.0 CVE-2001-0284 Buffer overflow in IPSEC authentication mechanism for OpenBSD 2.8 and earlier allows remote attackers to cause a denial of service and possibly execute arbitra… openbsd · openbsd 2001-05-03 hoch7.2 CVE-2001-0268 The i386_set_ldt system call in NetBSD 1.5 and earlier, and OpenBSD 2.8 and earlier, when the USER_LDT kernel option is enabled, does not validate a call gate … netbsd · netbsd, openbsd · openbsd 2001-05-03

Benachrichtigungen erhalten

Abonniere neue Schwachstellen und Frühwarnungen der letzten sieben Tage. Wähle aus, was für deinen Stack wichtig ist, und kopiere die Adresse in einen beliebigen Feedreader. Sobald du einen Typ auswählst, erscheinen weitere Filter.

Format:
Feed öffnen

Frühwarnungen sind Sicherheitsmeldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, zu Meldungen mit noch ausstehender CVE und zu Berichten, die noch nicht geprüft wurden. Die Verlässlichkeit zeigt, wie gut ein Eintrag geprüft ist: hoch, mittel oder niedrig.

Über dieses Dashboard

Das Dashboard führt einen eigenen Index aus Sicherheitsmeldungen und aktualisiert ihn alle 30 Minuten. Es führt die nationale Schwachstellendatenbank, Paket-Advisories, Malware-Meldungen und den Katalog aktiv ausgenutzter Schwachstellen zu einem Eintrag pro Problem zusammen. Meldungen zur selben Lücke werden gebündelt, damit nichts doppelt erscheint.

Öffne einen Eintrag, um alle Details zu sehen: Beschreibung, CVSS-Vektor, betroffene Pakete und Versionen, behobene Versionen, Schwachstellenklasse, Ausnutzungswahrscheinlichkeit und Referenzen.

Quellen: die GitHub Advisory Database (geprüfte Advisories, Malware-Meldungen und ungeprüfte Berichte), die National Vulnerability Database, das CVE Program (cve.org) für ganz neue Einträge, die OpenSSF-Liste schädlicher Pakete, der CISA-Katalog Known Exploited Vulnerabilities und die Sperrliste von Microsoft für schädliche VS-Code-Erweiterungen. Jeder Eintrag nennt seine Quellen auf der Detailseite.

Dieses Produkt nutzt die NVD-API, wird von der NVD aber weder unterstützt noch zertifiziert.

So liest du die Zahlen

  • Bedrohungslage: eine Einstufung aus den drei Zahlen daneben: kritische Meldungen der letzten 24 Stunden, in dieser Woche neu bestätigte ausgenutzte Schwachstellen und Malware-Meldungen dieser Woche. Sie dient der schnellen Orientierung und ist keine offizielle Warnstufe.
  • Schweregrad: Werte ab 9.0 gelten als kritisch, 7.0 bis 8.9 als hoch, 4.0 bis 6.9 als mittel und 0.1 bis 3.9 als niedrig. Der Schweregrad beschreibt, wie schwer eine Lücke allgemein wiegt. Ob die Komponente in deiner Umgebung erreichbar ist, berücksichtigt er nicht.
  • Bekannt ausgenutzt: Die Lücke wurde bei echten Angriffen ausgenutzt. Diese Einträge solltest du zuerst patchen. Bei Einträgen mit Patch-Frist siehst du, wie viele Tage noch bleiben.
  • Frühwarnungen: Meldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, geprüfte Advisories mit noch ausstehender CVE und Berichte, die noch nicht geprüft wurden.
  • Prioritätenliste: kritische und hohe Meldungen der letzten 7 Tage sowie alles, was neu ausgenutzt wird, sortiert nach Ausnutzung, Schweregrad und Score.

Häufige Fragen

Woher stammen die Daten?
Aus öffentlichen Schwachstellendatenbanken, Paket-Advisories und dem Katalog ausgenutzter Schwachstellen. NetSight sammelt sie alle 30 Minuten in einem eigenen Index und führt Doppelungen zusammen.
Wie prüfe ich, ob ich betroffen bin?
Suche nach deinem Produkt- oder Paketnamen, öffne den Eintrag und vergleiche deine installierte Version mit den betroffenen und den behobenen Versionen. Ein passender Produktname allein heißt noch nicht, dass deine Version betroffen ist.
Was bedeutet bekannt ausgenutzt?
Die Schwachstelle wurde bei echten Angriffen ausgenutzt. Solche Einträge tragen das Datum der Bestätigung und, falls vorhanden, eine Frist für das Einspielen des Patches.
Was ist eine Frühwarnung?
Eine Meldung, die vor oder ganz ohne CVE-Nummer erscheint, etwa zu einem Schadpaket oder ein geprüftes Advisory, dessen CVE noch aussteht. Du bekommst so einen Vorsprung, die Details können sich aber noch ändern.
Ist ein hoher Schweregrad immer dringender als ein niedriger?
Nein. Der Schweregrad misst die technische Auswirkung im Allgemeinen. Wie offen das betroffene System erreichbar ist, ob die Lücke bereits ausgenutzt wird und wie wahrscheinlich eine Ausnutzung ist, zählt genauso.
Kann ich neue Meldungen automatisch verfolgen?
Ja. Mit dem Feed-Baukasten weiter unten erstellst du einen RSS-, Atom- oder JSON-Feed, gefiltert nach Schweregrad, Technologie, Ökosystem oder Ausnutzungsstatus.