NetSight

Sicherheitslage

Ein aktuelles Lagebild zu neuen Schwachstellen, aktiv ausgenutzten Lücken und schädlichen Paketen.

Zurücksetzen
611 passende Meldungen · Seite 12 von 21Index aktualisiert gerade eben · Abonnieren · RSS
SchweregradIDTitelBetroffenAlter
hoch8.8 CVE-2023-33538 TP-Link Multiple Routers Command Injection VulnerabilityAusgenutzt tp-link · tl-wr940n_firmware, tp-link · tl-wr841n_firmware, tp-link · tl-wr740n_firmware 2023-06-07 hoch8.1 CVE-2023-33537 TP-Link TL-WR940N V2/V4, TL-WR841N V8/V10, and TL-WR740N V1/V2 was discovered to contain a buffer overflow via the component /userRpm/FixMapCfgRpm. tp-link · tl-wr940n_firmware, tp-link · tl-wr841n_firmware, tp-link · tl-wr740n_firmware 2023-06-07 hoch8.1 CVE-2023-33536 TP-Link TL-WR940N V2/V4, TL-WR841N V8/V10, and TL-WR740N V1/V2 was discovered to contain a buffer overflow via the component /userRpm/WlanMacFilterRpm. tp-link · tl-wr940n_firmware, tp-link · tl-wr841n_firmware, tp-link · tl-wr740n_firmware 2023-06-07 mittel4.6 CVE-2023-27126 The AES Key-IV pair used by the TP-Link TAPO C200 camera V3 (EU) on firmware version 1.1.22 Build 220725 is reused across all cameras. tp-link · tapo_c200_firmware 2023-06-06 mittel6.7 CVE-2023-31756 A command injection vulnerability exists in the administrative web portal in TP-Link Archer VR1600V devices running firmware Versions <= 0.1.0. tp-link · archer_vr1600v_firmware 2023-05-19 hoch8.8 CVE-2023-31701 TP-Link TL-WPA4530 KIT V2 (EU)_170406 and V2 (EU)_161115 is vulnerable to Command Injection via _httpRpmPlcDeviceRemove. tp-link · tl-wpa4530_kit_firmware 2023-05-17 hoch8.8 CVE-2023-31700 TP-Link TL-WPA4530 KIT V2 (EU)_170406 and V2 (EU)_161115 is vulnerable to Command Injection via _httpRpmPlcDeviceAdd. tp-link · tl-wpa4530_kit_firmware 2023-05-17 mittel4.5 CVE-2023-2646 A vulnerability has been found in TP-Link Archer C7v2 v2_en_us_180114 and classified as problematic. tp-link · archer_c7_firmware 2023-05-11 hoch7.5 CVE-2022-37255 TP-Link Tapo C310 1.3.0 devices allow access to the RTSP video feed via credentials of User --- and Password TPL075526460603. tp-link · tapo_c310_firmware 2023-04-16 mittel5.7 CVE-2023-28368 TP-Link L2 switch T2600G-28SQ firmware versions prior to 'T2600G-28SQ(UN)_V1_1.0.6 Build 20230227' uses vulnerable SSH host keys. tp-link · t2600g-28sq_firmware 2023-04-11 hoch8.8 CVE-2022-43636 This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of TP-Link TL-WR940N 6_211111 3.20.1(US) routers. tp-link · tl-wr940n_firmware 2023-03-29 mittel6.5 CVE-2022-43635 This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of TP-Link TL-WR940N 6_211111 3.20.1(US) route… tp-link · tl-wr940n_firmware 2023-03-29 hoch8.0 CVE-2022-42433 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR841N TL-WR841N(US)_V14_220121 routers. tp-link · tl-wr841_firmware 2023-03-29 hoch8.0 CVE-2022-24973 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR940N 3.20.1 Build 200316 Rel.34392n (5… tp-link · tl-wr940n_firmware 2023-03-28 mittel6.5 CVE-2022-24972 This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of TP-Link TL-WR940N 3.20.1 Build 200316 Rel.3… tp-link · tl-wr940n_firmware 2023-03-28 hoch8.8 CVE-2022-24353 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link AC1750 1.1.4 Build 20211022 rel.59103(5553)… tp-link · ac1750_firmware 2023-03-28 hoch8.8 CVE-2022-24352 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link AC1750 prior to 211210 routers. tp-link · ac1750_firmware 2023-03-28 hoch8.0 CVE-2022-0650 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR940N 3.20.1 Build 200316 Rel.34392n (5… tp-link · tl-wr940n_firmware 2023-03-28 kritisch9.8 CVE-2023-27078 A command injection issue was found in TP-Link MR3020 v.1_150921 that allows a remote attacker to execute arbitrary commands via a crafted request to the tftp … tp-link · tl-mr3020_firmware 2023-03-23 hoch8.8 CVE-2023-1389 TP-Link Archer AX-21 Command Injection VulnerabilityAusgenutzt tp-link · archer_ax21_firmware 2023-03-15 hoch7.5 CVE-2023-23040 TP-Link router TL-WR940N V6 3.19.1 Build 180119 uses a deprecated MD5 algorithm to hash the admin password used for basic authentication. tp-link · tl-wr940n_firmware 2023-02-22 mittel6.5 CVE-2023-0936 A vulnerability was found in TP-Link Archer C50 V2_160801. tp-link · archer_c50 2023-02-21 mittel6.4 CVE-2022-41505 An access control issue on TP-LInk Tapo C200 V1 devices allows physically proximate attackers to obtain root access by connecting to the UART pins, interruptin… tp-link · tapo_c200_v1_firmware 2023-01-23 hoch8.0 CVE-2021-37774 An issue was discovered in function httpProcDataSrv in TL-WDR7660 2.0.30 that allows attackers to execute arbitrary code. tp-link · tl-wdr7660_firmware 2023-01-19 kritisch9.8 CVE-2023-22303 TP-Link SG105PE firmware prior to 'TL-SG105PE(UN) 1.0_1.0.0 Build 20221208' contains an authentication bypass vulnerability. tp-link · tl-sg105pe_firmware 2023-01-17 kritisch9.8 CVE-2022-4498 In TP-Link routers, Archer C5 and WR710N-V1, running the latest available code, when receiving HTTP Basic Authentication the httpd service can be sent a crafte… tp-link · archer_c5_firmware, tp-link · tl-wr710n_firmware 2023-01-11 hoch7.5 CVE-2022-4499 TP-Link routers, Archer C5 and WR710N-V1, using the latest software, the strcmp function used for checking credentials in httpd, is susceptible to a side-chann… tp-link · archer_c5_firmware, tp-link · tl-wr710n_firmware 2023-01-11 hoch8.8 CVE-2022-48194 TP-Link TL-WR902AC devices through V3 0.9.1 allow remote authenticated attackers to execute arbitrary code or cause a Denial of Service (DoS) by uploading a cr… tp-link · tl-wr902ac_firmware 2022-12-30 hoch8.8 CVE-2022-46914 An issue in the firmware update process of TP-LINK TL-WA801N / TL-WA801ND V1 v3.12.16 and earlier allows attackers to execute arbitrary code or cause a Denial … tp-link · tl-wa801n_firmware, tp-link · tl-wa801nd_v1_firmware 2022-12-20 hoch8.8 CVE-2022-46912 An issue in the firmware update process of TP-Link TL-WR841N / TL-WA841ND V7 3.13.9 and earlier allows attackers to execute arbitrary code or cause a Denial of… tp-link · tl-wr841n_firmware, tp-link · tl-wr841nd_v7_firmware 2022-12-20

Benachrichtigungen erhalten

Abonniere neue Schwachstellen und Frühwarnungen der letzten sieben Tage. Wähle aus, was für deinen Stack wichtig ist, und kopiere die Adresse in einen beliebigen Feedreader. Sobald du einen Typ auswählst, erscheinen weitere Filter.

Format:
Feed öffnen

Frühwarnungen sind Sicherheitsmeldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, zu Meldungen mit noch ausstehender CVE und zu Berichten, die noch nicht geprüft wurden. Die Verlässlichkeit zeigt, wie gut ein Eintrag geprüft ist: hoch, mittel oder niedrig.

Über dieses Dashboard

Das Dashboard führt einen eigenen Index aus Sicherheitsmeldungen und aktualisiert ihn alle 30 Minuten. Es führt die nationale Schwachstellendatenbank, Paket-Advisories, Malware-Meldungen und den Katalog aktiv ausgenutzter Schwachstellen zu einem Eintrag pro Problem zusammen. Meldungen zur selben Lücke werden gebündelt, damit nichts doppelt erscheint.

Öffne einen Eintrag, um alle Details zu sehen: Beschreibung, CVSS-Vektor, betroffene Pakete und Versionen, behobene Versionen, Schwachstellenklasse, Ausnutzungswahrscheinlichkeit und Referenzen.

Quellen: die GitHub Advisory Database (geprüfte Advisories, Malware-Meldungen und ungeprüfte Berichte), die National Vulnerability Database, das CVE Program (cve.org) für ganz neue Einträge, die OpenSSF-Liste schädlicher Pakete, der CISA-Katalog Known Exploited Vulnerabilities und die Sperrliste von Microsoft für schädliche VS-Code-Erweiterungen. Jeder Eintrag nennt seine Quellen auf der Detailseite.

Dieses Produkt nutzt die NVD-API, wird von der NVD aber weder unterstützt noch zertifiziert.

So liest du die Zahlen

  • Bedrohungslage: eine Einstufung aus den drei Zahlen daneben: kritische Meldungen der letzten 24 Stunden, in dieser Woche neu bestätigte ausgenutzte Schwachstellen und Malware-Meldungen dieser Woche. Sie dient der schnellen Orientierung und ist keine offizielle Warnstufe.
  • Schweregrad: Werte ab 9.0 gelten als kritisch, 7.0 bis 8.9 als hoch, 4.0 bis 6.9 als mittel und 0.1 bis 3.9 als niedrig. Der Schweregrad beschreibt, wie schwer eine Lücke allgemein wiegt. Ob die Komponente in deiner Umgebung erreichbar ist, berücksichtigt er nicht.
  • Bekannt ausgenutzt: Die Lücke wurde bei echten Angriffen ausgenutzt. Diese Einträge solltest du zuerst patchen. Bei Einträgen mit Patch-Frist siehst du, wie viele Tage noch bleiben.
  • Frühwarnungen: Meldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, geprüfte Advisories mit noch ausstehender CVE und Berichte, die noch nicht geprüft wurden.
  • Prioritätenliste: kritische und hohe Meldungen der letzten 7 Tage sowie alles, was neu ausgenutzt wird, sortiert nach Ausnutzung, Schweregrad und Score.

Häufige Fragen

Woher stammen die Daten?
Aus öffentlichen Schwachstellendatenbanken, Paket-Advisories und dem Katalog ausgenutzter Schwachstellen. NetSight sammelt sie alle 30 Minuten in einem eigenen Index und führt Doppelungen zusammen.
Wie prüfe ich, ob ich betroffen bin?
Suche nach deinem Produkt- oder Paketnamen, öffne den Eintrag und vergleiche deine installierte Version mit den betroffenen und den behobenen Versionen. Ein passender Produktname allein heißt noch nicht, dass deine Version betroffen ist.
Was bedeutet bekannt ausgenutzt?
Die Schwachstelle wurde bei echten Angriffen ausgenutzt. Solche Einträge tragen das Datum der Bestätigung und, falls vorhanden, eine Frist für das Einspielen des Patches.
Was ist eine Frühwarnung?
Eine Meldung, die vor oder ganz ohne CVE-Nummer erscheint, etwa zu einem Schadpaket oder ein geprüftes Advisory, dessen CVE noch aussteht. Du bekommst so einen Vorsprung, die Details können sich aber noch ändern.
Ist ein hoher Schweregrad immer dringender als ein niedriger?
Nein. Der Schweregrad misst die technische Auswirkung im Allgemeinen. Wie offen das betroffene System erreichbar ist, ob die Lücke bereits ausgenutzt wird und wie wahrscheinlich eine Ausnutzung ist, zählt genauso.
Kann ich neue Meldungen automatisch verfolgen?
Ja. Mit dem Feed-Baukasten weiter unten erstellst du einen RSS-, Atom- oder JSON-Feed, gefiltert nach Schweregrad, Technologie, Ökosystem oder Ausnutzungsstatus.