NetSight

Sicherheitslage

Ein aktuelles Lagebild zu neuen Schwachstellen, aktiv ausgenutzten Lücken und schädlichen Paketen.

Zurücksetzen
611 passende Meldungen · Seite 17 von 21Index aktualisiert gerade eben · Abonnieren · RSS
SchweregradIDTitelBetroffenAlter
kritisch9.8 CVE-2019-13651 TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow portMappingProtocol OS Command Injection (issue 3 of 5). tp-link · m7350_firmware 2019-10-24 kritisch9.8 CVE-2019-13650 TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow internalPort OS Command Injection (issue 2 of 5). tp-link · m7350_firmware 2019-10-24 kritisch9.8 CVE-2019-13649 TP-Link M7350 devices through 1.0.16 Build 181220 Rel.1116n allow externalPort OS Command Injection (issue 1 of 5). tp-link · m7350_firmware 2019-10-24 hoch8.8 CVE-2019-13268 TP-Link Archer C3200 V1 and Archer C2 V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the … tp-link · archer_c3200_v1_firmware, tp-link · archer_c2_v1_firmware 2019-08-27 hoch8.8 CVE-2019-13267 TP-Link Archer C3200 V1 and Archer C2 V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the … tp-link · archer_c3200_v1_firmware, tp-link · archer_c2_v1_firmware 2019-08-27 hoch8.8 CVE-2019-13266 TP-Link Archer C3200 V1 and Archer C2 V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the … tp-link · archer_c3200_v1_firmware, tp-link · archer_c2_v1_firmware 2019-08-27 hoch8.8 CVE-2019-15060 The traceroute function on the TP-Link TL-WR840N v4 router with firmware through 0.9.1 3.16 is vulnerable to remote code execution via a crafted payload in an … tp-link · tl-wr840n_firmware 2019-08-22 hoch8.8 CVE-2019-12104 The web-based configuration interface of the TP-Link M7350 V3 with firmware before 190531 is affected by several post-authentication command injection vulnerab… tp-link · m7350_firmware 2019-08-14 kritisch9.8 CVE-2019-12103 The web-based configuration interface of the TP-Link M7350 V3 with firmware before 190531 is affected by a pre-authentication command injection vulnerability. tp-link · m7350_firmware 2019-08-14 kritisch9.8 CVE-2019-13614 CMD_SET_CONFIG_COUNTRY in the TP-Link Device Debug protocol in TP-Link Archer C1200 1.0.0 Build 20180502 rel.45702 and earlier is prone to a stack-based buffer… tp-link · archer_c1200_firmware 2019-07-17 kritisch9.8 CVE-2019-13613 CMD_FTEST_CONFIG in the TP-Link Device Debug protocol in TP-Link Wireless Router Archer Router version 1.0.0 Build 20180502 rel.45702 (EU) and earlier is prone… tp-link · archer_c1200_firmware 2019-07-17 hoch7.2 CVE-2018-16119 Stack-based buffer overflow in the httpd server of TP-Link WR1043nd (Firmware Version 3) allows remote attackers to execute arbitrary code via a malicious Medi… tp-link · tl-wr1043nd_firmware 2019-06-20 hoch7.5 CVE-2019-6972 An issue was discovered on TP-Link TL-WR1043ND V2 devices. tp-link · tl-wr1043nd_firmware 2019-06-19 kritisch9.8 CVE-2019-6971 An issue was discovered on TP-Link TL-WR1043ND V2 devices. tp-link · tl-wr1043nd_firmware 2019-06-19 hoch8.8 CVE-2019-6989 TP-Link TL-WR940N is vulnerable to a stack-based buffer overflow, caused by improper bounds checking by the ipAddrDispose function. tp-link · tl-wr940n_firmware, tp-link · tl-wr941nd_firmware 2019-06-06 mittel4.8 CVE-2019-12195 TP-Link TL-WR840N v5 00000005 devices allow XSS via the network name. tp-link · tl-wr840n_firmware 2019-05-24 mittel6.1 CVE-2016-10719 TP-Link Archer CR-700 1.0.6 devices have an XSS vulnerability that can be introduced into the admin account through a DHCP request, allowing the attacker to st… tp-link · archer_cr700_firmware 2019-05-15 mittel4.9 CVE-2018-18489 The ping feature in the Diagnostic functionality on TP-LINK WR840N v2 Firmware 3.16.9 Build 150701 Rel.51516n devices allows remote attackers to cause a denial… tp-link · wr840n_firmware 2019-04-16 hoch7.5 CVE-2018-15840 TP-Link TL-WR840N devices allow remote attackers to cause a denial of service (networking outage) via fragmented packets, as demonstrated by an "nmap -f" comma… tp-link · tl-wr840n_firmware 2019-03-29 hoch8.8 CVE-2019-6487 TP-Link WDR Series devices through firmware v3 (such as TL-WDR5620 V3.0) are affected by command injection (after login) leading to remote code execution, beca… tp-link · tl-wdr5620_firmware, tp-link · tl-wdr3500_firmware, tp-link · tl-wdr3600_firmware +2 2019-01-18 mittel5.4 CVE-2018-20372 TP-Link TD-W8961ND devices allow XSS via the hostname of a DHCP client. tp-link · td-w8961nd_firmware 2018-12-23 hoch7.2 CVE-2018-3951 An exploitable remote code execution vulnerability exists in the HTTP header-parsing function of the TP-Link TL-R600VPN HTTP Server. tp-link · tl-r600vpn_firmware 2018-12-01 hoch8.8 CVE-2018-3950 An exploitable remote code execution vulnerability exists in the ping and tracert functionality of the TP-Link TL-R600VPN HWv3 FRNv1.3.0 and HWv2 FRNv1.2.3 htt… tp-link · tl-r600vpn_firmware 2018-12-01 hoch7.5 CVE-2018-3949 An exploitable information disclosure vulnerability exists in the HTTP server functionality of the TP-Link TL-R600VPN. tp-link · tl-r600vpn_firmware 2018-12-01 hoch7.5 CVE-2018-3948 An exploitable denial-of-service vulnerability exists in the URI-parsing functionality of the TP-Link TL-R600VPN HTTP server. tp-link · tl-r600vpn_firmware 2018-11-30 hoch7.2 CVE-2018-19537 TP-Link Archer C5 devices through V2_160201_US allow remote command execution via shell metacharacters on the wan_dyn_hostname line of a configuration file tha… tp-link · archer_c5_firmware 2018-11-26 kritisch9.8 CVE-2018-19528 TP-Link TL-WR886N 7.0 1.1.0 devices allow remote attackers to cause a denial of service (Tlb Load Exception) via crafted DNS packets to port 53/udp. tp-link · tl-wr886n_firmware 2018-11-26 hoch7.5 CVE-2018-18428 TP-Link TL-SC3130 1.6.18P12_121101 devices allow unauthenticated RTSP stream access, as demonstrated by a /jpg/image.jpg URI. tp-link · tl-sc3130_firmware 2018-10-19 hoch8.8 CVE-2018-15702 The web interface in TP-Link TL-WRN841N 0.9.1 4.16 v0348.0 is vulnerable to CSRF due to insufficient validation of the referer field. tp-link · tl-wrn841n_firmware 2018-10-01 mittel6.5 CVE-2018-15701 The web interface in TP-Link TL-WRN841N 0.9.1 4.16 v0348.0 is vulnerable to a denial of service when an unauthenticated LAN user sends a crafted HTTP header co… tp-link · tl-wrn841n_firmware 2018-10-01

Benachrichtigungen erhalten

Abonniere neue Schwachstellen und Frühwarnungen der letzten sieben Tage. Wähle aus, was für deinen Stack wichtig ist, und kopiere die Adresse in einen beliebigen Feedreader. Sobald du einen Typ auswählst, erscheinen weitere Filter.

Format:
Feed öffnen

Frühwarnungen sind Sicherheitsmeldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, zu Meldungen mit noch ausstehender CVE und zu Berichten, die noch nicht geprüft wurden. Die Verlässlichkeit zeigt, wie gut ein Eintrag geprüft ist: hoch, mittel oder niedrig.

Über dieses Dashboard

Das Dashboard führt einen eigenen Index aus Sicherheitsmeldungen und aktualisiert ihn alle 30 Minuten. Es führt die nationale Schwachstellendatenbank, Paket-Advisories, Malware-Meldungen und den Katalog aktiv ausgenutzter Schwachstellen zu einem Eintrag pro Problem zusammen. Meldungen zur selben Lücke werden gebündelt, damit nichts doppelt erscheint.

Öffne einen Eintrag, um alle Details zu sehen: Beschreibung, CVSS-Vektor, betroffene Pakete und Versionen, behobene Versionen, Schwachstellenklasse, Ausnutzungswahrscheinlichkeit und Referenzen.

Quellen: die GitHub Advisory Database (geprüfte Advisories, Malware-Meldungen und ungeprüfte Berichte), die National Vulnerability Database, das CVE Program (cve.org) für ganz neue Einträge, die OpenSSF-Liste schädlicher Pakete, der CISA-Katalog Known Exploited Vulnerabilities und die Sperrliste von Microsoft für schädliche VS-Code-Erweiterungen. Jeder Eintrag nennt seine Quellen auf der Detailseite.

Dieses Produkt nutzt die NVD-API, wird von der NVD aber weder unterstützt noch zertifiziert.

So liest du die Zahlen

  • Bedrohungslage: eine Einstufung aus den drei Zahlen daneben: kritische Meldungen der letzten 24 Stunden, in dieser Woche neu bestätigte ausgenutzte Schwachstellen und Malware-Meldungen dieser Woche. Sie dient der schnellen Orientierung und ist keine offizielle Warnstufe.
  • Schweregrad: Werte ab 9.0 gelten als kritisch, 7.0 bis 8.9 als hoch, 4.0 bis 6.9 als mittel und 0.1 bis 3.9 als niedrig. Der Schweregrad beschreibt, wie schwer eine Lücke allgemein wiegt. Ob die Komponente in deiner Umgebung erreichbar ist, berücksichtigt er nicht.
  • Bekannt ausgenutzt: Die Lücke wurde bei echten Angriffen ausgenutzt. Diese Einträge solltest du zuerst patchen. Bei Einträgen mit Patch-Frist siehst du, wie viele Tage noch bleiben.
  • Frühwarnungen: Meldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, geprüfte Advisories mit noch ausstehender CVE und Berichte, die noch nicht geprüft wurden.
  • Prioritätenliste: kritische und hohe Meldungen der letzten 7 Tage sowie alles, was neu ausgenutzt wird, sortiert nach Ausnutzung, Schweregrad und Score.

Häufige Fragen

Woher stammen die Daten?
Aus öffentlichen Schwachstellendatenbanken, Paket-Advisories und dem Katalog ausgenutzter Schwachstellen. NetSight sammelt sie alle 30 Minuten in einem eigenen Index und führt Doppelungen zusammen.
Wie prüfe ich, ob ich betroffen bin?
Suche nach deinem Produkt- oder Paketnamen, öffne den Eintrag und vergleiche deine installierte Version mit den betroffenen und den behobenen Versionen. Ein passender Produktname allein heißt noch nicht, dass deine Version betroffen ist.
Was bedeutet bekannt ausgenutzt?
Die Schwachstelle wurde bei echten Angriffen ausgenutzt. Solche Einträge tragen das Datum der Bestätigung und, falls vorhanden, eine Frist für das Einspielen des Patches.
Was ist eine Frühwarnung?
Eine Meldung, die vor oder ganz ohne CVE-Nummer erscheint, etwa zu einem Schadpaket oder ein geprüftes Advisory, dessen CVE noch aussteht. Du bekommst so einen Vorsprung, die Details können sich aber noch ändern.
Ist ein hoher Schweregrad immer dringender als ein niedriger?
Nein. Der Schweregrad misst die technische Auswirkung im Allgemeinen. Wie offen das betroffene System erreichbar ist, ob die Lücke bereits ausgenutzt wird und wie wahrscheinlich eine Ausnutzung ist, zählt genauso.
Kann ich neue Meldungen automatisch verfolgen?
Ja. Mit dem Feed-Baukasten weiter unten erstellst du einen RSS-, Atom- oder JSON-Feed, gefiltert nach Schweregrad, Technologie, Ökosystem oder Ausnutzungsstatus.