NetSight

Sicherheitslage

Ein aktuelles Lagebild zu neuen Schwachstellen, aktiv ausgenutzten Lücken und schädlichen Paketen.

Zurücksetzen
125 passende Meldungen · Seite 4 von 5Index aktualisiert vor 2 Minuten · Abonnieren · RSS
SchweregradIDTitelBetroffenAlter
hoch8.8 CVE-2009-5157 On Linksys WAG54G2 1.00.10 devices, there is authenticated command injection via shell metacharacters in the setup.cgi c4_ping_ipaddr variable. linksys · wag54g2_firmware 2019-06-11 hoch7.8 CVE-2019-7311 An issue was discovered on Linksys WRT1900ACS 1.0.3.187766 devices. linksys · wrt1900acs_firmware 2019-06-06 hoch7.2 CVE-2018-3955 An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmwa… linksys · e1200_firmware, linksys · e2500_firmware 2018-10-17 hoch7.2 CVE-2018-3954 Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command … linksys · e1200_firmware, linksys · e2500_firmware 2018-10-17 hoch7.2 CVE-2018-3953 Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command … linksys · e1200_firmware, linksys · e2500_firmware 2018-10-17 hoch8.8 CVE-2018-17208 Linksys Velop 1.1.2.187020 devices allow unauthenticated command injection, providing an attacker with full root access, via cgi-bin/zbtest.cgi or cgi-bin/zbte… linksys · velop_firmware 2018-09-19 hoch8.8 CVE-2017-10677 Cross-Site Request Forgery (CSRF) exists on Linksys EA4500 devices with Firmware Version before 2.1.41.164606, as demonstrated by a request to apply.cgi to dis… linksys · ea4500_firmware 2017-08-06 hoch7.5 CVE-2014-8244 Linksys SMART WiFi firmware on EA2700 and EA3500 devices; before 2.1.41 build 162351 on E4200v2 and EA4500 devices; before 1.1.41 build 162599 on EA6200 device… linksys · ea3500_firmware, linksys · ea3500, linksys · ea6700_firmware +9 2014-11-01 hoch7.1 CVE-2013-3066 Linksys EA6500 with firmware 1.1.28.147876 does not properly restrict access, which allows remote attackers to obtain sensitive information (clients and router… linksys · ea6500_firmware, linksys · ea6500 2014-09-29 hoch7.5 CVE-2011-4500 The UPnP IGD implementation on the Cisco Linksys WRT54GX with firmware 2.00.05, when UPnP is enabled, configures the SOAP server to listen on the WAN port, whi… cisco · linksys_wrt54gx_router_firmware, linksys · wrt54gx 2011-11-22 hoch7.5 CVE-2011-4499 The UPnP IGD implementation in the Broadcom UPnP stack on the Cisco Linksys WRT54G with firmware before 4.30.5, WRT54GS v1 through v3 with firmware before 4.71… cisco · linksys_wrt54g_router_firmware, linksys · wrt54g, cisco · linksys_wrt54gs_router_firmware +1 2011-11-22 hoch7.8 CVE-2011-0352 Buffer overflow in the web-based management interface on the Cisco Linksys WRT54GC router with firmware before 1.06.1 allows remote attackers to cause a denial… cisco · linksys_wrt54gc_router, cisco · linksys_wrt54gc_router_firmware 2011-01-24 hoch7.8 CVE-2009-1560 The Cisco Linksys WVC54GCA wireless video camera with firmware 1.00R22 and 1.00R24 stores passwords and wireless-network keys in cleartext in (1) pass_wd.htm a… cisco · wvc54gc 2009-05-06 hoch7.8 CVE-2009-1559 Absolute path traversal vulnerability in adm/file.cgi on the Cisco Linksys WVC54GCA wireless video camera with firmware 1.00R24 and possibly 1.00R22 allows rem… cisco · wvc54gca 2009-05-06 hoch7.8 CVE-2009-1558 Directory traversal vulnerability in adm/file.cgi on the Cisco Linksys WVC54GCA wireless video camera with firmware 1.00R22 and 1.00R24 allows remote attackers… cisco · wvc54gca 2009-05-06 hoch7.5 CVE-2008-4390 The Cisco Linksys WVC54GC wireless video camera before firmware 1.25 sends cleartext configuration data in response to a Setup Wizard remote-management command… cisco · linksys_wvc54gc_firmware 2008-12-09 hoch7.1 CVE-2008-4441 The Marvell driver for the Linksys WAP4400N Wi-Fi access point with firmware 1.2.14 on the Marvell 88W8361P-BEM1 chipset, when WEP mode is enabled, does not pr… linksys · wap400n 2008-10-14 hoch7.8 CVE-2008-2636 The HTTP service on the Cisco Linksys WRH54G with firmware 1.01.03 allows remote attackers to cause a denial of service (management interface outage) or possib… cisco · linksys_wrh54g_router 2008-06-10 hoch7.8 CVE-2008-2092 Linksys SPA-2102 Phone Adapter 3.3.6 allows remote attackers to cause a denial of service (crash) via a long ping packet ("ping of death"). linksys · spa-2102_phone_adapter 2008-05-06 hoch7.5 CVE-2007-6709 The Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.01.03 and earlier firmware has "admin" as its default password for the "admin" account, which makes it… linksys · wag54gs 2008-03-13 hoch7.5 CVE-2008-1264 The Linksys WRT54G router has "admin" as its default FTP password, which allows remote attackers to access sensitive files including nvram.cfg, a file that lis… linksys · wrt54g 2008-03-10 hoch7.8 CVE-2008-1265 The Linksys WRT54G router allows remote attackers to cause a denial of service (device restart) via a long username and password to the FTP interface. linksys · wrt54g 2008-03-10 hoch7.8 CVE-2007-2270 The Linksys SPA941 VoIP Phone allows remote attackers to cause a denial of service (device reboot) via a 0377 (0xff) character in the From header, and possibly… linksys · spa941 2007-04-25 hoch7.8 CVE-2006-7121 The HTTP server in Linksys SPA-921 VoIP Desktop Phone allows remote attackers to cause a denial of service (reboot) via (1) a long URL, or a long (2) username … linksys · spa921 2007-03-06 hoch7.8 CVE-2006-6411 PhoneCtrl.exe in Linksys WIP 330 Wireless-G IP Phone 1.00.06A allows remote attackers to cause a denial of service (crash) via a TCP SYN scan, as demonstrated … linksys · wip_330_wireless-g_ip_phone 2006-12-10 hoch8.3 CVE-2006-5882 Stack-based buffer overflow in the Broadcom BCMWL5.SYS wireless device driver 3.50.21.10, as used in Cisco Linksys WPC300N Wireless-N Notebook Adapter before 4… linksys · wpc300n_wireless-n_notebook_adapter_driver, broadcom · bcmwl5.sys_wireless_device_driver 2006-11-14 hoch7.5 CVE-2006-2559 Linksys WRT54G Wireless-G Broadband Router allows remote attackers to bypass access restrictions and conduct unauthorized operations via a UPnP request with a … linksys · wrt54g, linksys · wrt54g_v5 2006-05-24 hoch7.8 CVE-2005-4257 Linksys WRT54GS and BEFW11S4 allows remote attackers to cause a denial of service (device crash) via an IP packet with the same source and destination IPs and … linksys · befw11s4, linksys · befw11s4_v3, linksys · befw11s4_v4 +1 2005-12-15 hoch7.5 CVE-2005-2799 Buffer overflow in apply.cgi in Linksys WRT54G 3.01.03, 3.03.6, and possibly other versions before 4.20.7, allows remote attackers to execute arbitrary code vi… linksys · wrt54g 2005-09-15 hoch7.5 CVE-2005-2914 ezconfig.asp in Linksys WRT54G router 3.01.03, 3.03.6, non-default configurations of 2.04.4, and possibly other versions, does not use an authentication initia… linksys · wrt54g 2005-09-14

Benachrichtigungen erhalten

Abonniere neue Schwachstellen und Frühwarnungen der letzten sieben Tage. Wähle aus, was für deinen Stack wichtig ist, und kopiere die Adresse in einen beliebigen Feedreader. Sobald du einen Typ auswählst, erscheinen weitere Filter.

Format:
Feed öffnen

Frühwarnungen sind Sicherheitsmeldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, zu Meldungen mit noch ausstehender CVE und zu Berichten, die noch nicht geprüft wurden. Die Verlässlichkeit zeigt, wie gut ein Eintrag geprüft ist: hoch, mittel oder niedrig.

Über dieses Dashboard

Das Dashboard führt einen eigenen Index aus Sicherheitsmeldungen und aktualisiert ihn alle 30 Minuten. Es führt die nationale Schwachstellendatenbank, Paket-Advisories, Malware-Meldungen und den Katalog aktiv ausgenutzter Schwachstellen zu einem Eintrag pro Problem zusammen. Meldungen zur selben Lücke werden gebündelt, damit nichts doppelt erscheint.

Öffne einen Eintrag, um alle Details zu sehen: Beschreibung, CVSS-Vektor, betroffene Pakete und Versionen, behobene Versionen, Schwachstellenklasse, Ausnutzungswahrscheinlichkeit und Referenzen.

Quellen: die GitHub Advisory Database (geprüfte Advisories, Malware-Meldungen und ungeprüfte Berichte), die National Vulnerability Database, das CVE Program (cve.org) für ganz neue Einträge, die OpenSSF-Liste schädlicher Pakete, der CISA-Katalog Known Exploited Vulnerabilities und die Sperrliste von Microsoft für schädliche VS-Code-Erweiterungen. Jeder Eintrag nennt seine Quellen auf der Detailseite.

Dieses Produkt nutzt die NVD-API, wird von der NVD aber weder unterstützt noch zertifiziert.

So liest du die Zahlen

  • Bedrohungslage: eine Einstufung aus den drei Zahlen daneben: kritische Meldungen der letzten 24 Stunden, in dieser Woche neu bestätigte ausgenutzte Schwachstellen und Malware-Meldungen dieser Woche. Sie dient der schnellen Orientierung und ist keine offizielle Warnstufe.
  • Schweregrad: Werte ab 9.0 gelten als kritisch, 7.0 bis 8.9 als hoch, 4.0 bis 6.9 als mittel und 0.1 bis 3.9 als niedrig. Der Schweregrad beschreibt, wie schwer eine Lücke allgemein wiegt. Ob die Komponente in deiner Umgebung erreichbar ist, berücksichtigt er nicht.
  • Bekannt ausgenutzt: Die Lücke wurde bei echten Angriffen ausgenutzt. Diese Einträge solltest du zuerst patchen. Bei Einträgen mit Patch-Frist siehst du, wie viele Tage noch bleiben.
  • Frühwarnungen: Meldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, geprüfte Advisories mit noch ausstehender CVE und Berichte, die noch nicht geprüft wurden.
  • Prioritätenliste: kritische und hohe Meldungen der letzten 7 Tage sowie alles, was neu ausgenutzt wird, sortiert nach Ausnutzung, Schweregrad und Score.

Häufige Fragen

Woher stammen die Daten?
Aus öffentlichen Schwachstellendatenbanken, Paket-Advisories und dem Katalog ausgenutzter Schwachstellen. NetSight sammelt sie alle 30 Minuten in einem eigenen Index und führt Doppelungen zusammen.
Wie prüfe ich, ob ich betroffen bin?
Suche nach deinem Produkt- oder Paketnamen, öffne den Eintrag und vergleiche deine installierte Version mit den betroffenen und den behobenen Versionen. Ein passender Produktname allein heißt noch nicht, dass deine Version betroffen ist.
Was bedeutet bekannt ausgenutzt?
Die Schwachstelle wurde bei echten Angriffen ausgenutzt. Solche Einträge tragen das Datum der Bestätigung und, falls vorhanden, eine Frist für das Einspielen des Patches.
Was ist eine Frühwarnung?
Eine Meldung, die vor oder ganz ohne CVE-Nummer erscheint, etwa zu einem Schadpaket oder ein geprüftes Advisory, dessen CVE noch aussteht. Du bekommst so einen Vorsprung, die Details können sich aber noch ändern.
Ist ein hoher Schweregrad immer dringender als ein niedriger?
Nein. Der Schweregrad misst die technische Auswirkung im Allgemeinen. Wie offen das betroffene System erreichbar ist, ob die Lücke bereits ausgenutzt wird und wie wahrscheinlich eine Ausnutzung ist, zählt genauso.
Kann ich neue Meldungen automatisch verfolgen?
Ja. Mit dem Feed-Baukasten weiter unten erstellst du einen RSS-, Atom- oder JSON-Feed, gefiltert nach Schweregrad, Technologie, Ökosystem oder Ausnutzungsstatus.