NetSight

Sicherheitslage

Ein aktuelles Lagebild zu neuen Schwachstellen, aktiv ausgenutzten Lücken und schädlichen Paketen.

Zurücksetzen
186 passende Meldungen · Seite 1 von 7Index aktualisiert vor 2 Minuten · Abonnieren · RSS
SchweregradIDTitelBetroffenAlter
mittel5.5 CVE-2026-57843 NetBSD contains an information disclosure vulnerability in mm_open() within sys/dev/mm.c that allows unprivileged local users to obtain real kernel virtual add… 2026-09-11 hoch7.0 CVE-2026-57842 NetBSD contains a use-after-free and double-free vulnerability in msg_recv_copyin() within the COMPAT_NETBSD32 compatibility layer due to a missing return stat… 2026-09-11 hoch7.0 CVE-2026-53996 NetBSD's hdaudio(4) driver in sys/dev/hdaudio/hdaudio.c contains a missing access control vulnerability that allows unprivileged local attackers to invoke the … 2026-08-12 mittel5.5 CVE-2026-32849 NetBSD prior to commit ec8451e contains a signed integer overflow vulnerability in the cryptodev_op() function in sys/opencrypto/cryptodev.c where the local va… 2026-05-18 mittel4.7 CVE-2026-32848 NetBSD prior to commit ec8451e contains a race condition vulnerability in cryptodev_op() within the opencrypto subsystem that allows local attackers to trigger… 2026-05-18 hoch7.5 CVE-2023-45198 ftpd before "NetBSD-ftpd 20230930" can leak information about the host filesystem before authentication via an MLSD or MLST command. netbsd · ftpd, netbsd · tnftpd 2023-10-05 hoch7.5 CVE-2021-45489 In NetBSD through 9.2, the IPv6 Flow Label generation algorithm employs a weak cryptographic PRNG. netbsd · netbsd 2021-12-25 hoch7.5 CVE-2021-45488 In NetBSD through 9.2, there is an information leak in the TCP ISN (ISS) generation algorithm. netbsd · netbsd 2021-12-25 hoch7.5 CVE-2021-45487 In NetBSD through 9.2, the IPv4 ID generation algorithm does not use appropriate cryptographic measures. netbsd · netbsd 2021-12-25 hoch7.5 CVE-2021-45484 In NetBSD through 9.2, the IPv6 fragment ID generation algorithm employs a weak cryptographic PRNG. netbsd · netbsd 2021-12-25 mittel5.3 CVE-2020-26139 An issue was discovered in the kernel in NetBSD 7.1. netbsd · netbsd, debian · debian_linux, arista · c-100_firmware +9 2021-05-11 hoch7.5 CVE-2012-5365 The IPv6 implementation in FreeBSD and NetBSD (unknown versions, year 2012 and earlier) allows remote attackers to cause a denial of service via a flood of ICM… freebsd · freebsd, netbsd · netbsd 2020-02-20 hoch7.5 CVE-2012-5363 The IPv6 implementation in FreeBSD and NetBSD (unknown versions, year 2012 and earlier) allows remote attackers to cause a denial of service via a flood of ICM… freebsd · freebsd, netbsd · netbsd 2020-02-20 hoch7.5 CVE-2011-2480 Information Disclosure vulnerability in the 802.11 stack, as used in FreeBSD before 8.2 and NetBSD when using certain non-x86 architectures. freebsd · freebsd, netbsd · netbsd 2019-11-27 kritisch9.8 CVE-2017-1000378 The NetBSD qsort() function is recursive, and not randomized, an attacker can construct a pathological input array of N elements that causes qsort() to determi… netbsd · netbsd 2017-06-19 kritisch9.8 CVE-2017-1000375 NetBSD maps the run-time link-editor ld.so directly below the stack region, even if ASLR is enabled, this allows attackers to more easily manipulate memory lea… netbsd · netbsd 2017-06-19 kritisch9.8 CVE-2017-1000374 A flaw exists in NetBSD's implementation of the stack guard page that allows attackers to bypass it resulting in arbitrary code execution using certain setuid … netbsd · netbsd 2017-06-19 hoch7.8 CVE-2016-6253 mail.local in NetBSD versions 6.0 through 6.0.6, 6.1 through 6.1.5, and 7.0 allows local users to change ownership of or append data to arbitrary files on the … netbsd · netbsd 2017-01-20 kritisch9.8 CVE-2015-8212 CGI handling flaw in bozohttpd in NetBSD 6.0 through 6.0.6, 6.1 through 6.1.5, and 7.0 allows remote attackers to execute arbitrary code via crafted arguments,… netbsd · netbsd 2017-01-19 mittel5.0 CVE-2015-5917 The glob implementation in tnftpd (formerly lukemftpd), as used in Apple OS X before 10.11, allows remote attackers to cause a denial of service (memory consum… netbsd · tnftpd 2015-10-09 mittel6.8 CVE-2015-2305 Integer overflow in the regcomp implementation in the Henry Spencer BSD regex library (aka rxspencer) alpha3.8.g5 on 32-bit platforms, as used in NetBSD throug… rxspencer_project · rxspencer, canonical · ubuntu_linux, debian · debian_linux +2 2015-03-30 mittel5.0 CVE-2014-7250 The TCP stack in 4.3BSD Net/2, as used in FreeBSD 5.4, NetBSD possibly 2.0, and OpenBSD possibly 3.6, does not properly implement the session timer, which allo… bsd · bsd, freebsd · freebsd, netbsd · netbsd +1 2014-12-12 hoch7.5 CVE-2014-8517 The fetch_url function in usr.bin/ftp/fetch.c in tnftp, as used in NetBSD 5.1 through 5.1.4, 5.2 through 5.2.2, 6.0 through 6.0.6, and 6.1 through 6.1.5 allows… apple · mac_os_x, netbsd · netbsd 2014-11-17 mittel5.0 CVE-2014-5384 The VIQR module in the iconv implementation in FreeBSD 10.0 before p6 and NetBSD allows context-dependent attackers to cause a denial of service (out-of-bounds… freebsd · freebsd, netbsd · netbsd 2014-08-21 mittel5.0 CVE-2014-3951 The HZ module in the iconv implementation in FreeBSD 10.0 before p6 and NetBSD allows context-dependent attackers to cause a denial of service (NULL pointer de… freebsd · freebsd, netbsd · netbsd 2014-08-21 mittel5.0 CVE-2014-5015 bozotic HTTP server (aka bozohttpd) before 20140708, as used in NetBSD, truncates paths when checking .htpasswd restrictions, which allows remote attackers to … eterna · bozohttpd, netbsd · netbsd 2014-07-24 mittel5.0 CVE-2007-6754 The ipalloc function in libc/stdlib/malloc.c in jemalloc in libc for FreeBSD 6.4 and NetBSD does not properly allocate memory, which makes it easier for contex… freebsd · freebsd, netbsd · netbsd 2012-07-25 mittel5.0 CVE-2006-7252 Integer overflow in the calloc function in libc/stdlib/malloc.c in jemalloc in libc for FreeBSD 6.4 and NetBSD makes it easier for context-dependent attackers … freebsd · freebsd, netbsd · netbsd 2012-07-25 hoch7.2 CVE-2012-0217 The x86-64 kernel system-call functionality in Xen 4.1.2 and earlier, as used in Citrix XenServer 6.0.2 and earlier and other products; Oracle Solaris 11 and e… freebsd · freebsd, illumos · illumos, joyent · smartos +8 2012-06-12 hoch7.8 CVE-2011-2393 The Neighbor Discovery (ND) protocol implementation in the IPv6 stack in FreeBSD, NetBSD, and possibly other BSD-based operating systems allows remote attacker… freebsd · freebsd, netbsd · netbsd 2012-02-02

Benachrichtigungen erhalten

Abonniere neue Schwachstellen und Frühwarnungen der letzten sieben Tage. Wähle aus, was für deinen Stack wichtig ist, und kopiere die Adresse in einen beliebigen Feedreader. Sobald du einen Typ auswählst, erscheinen weitere Filter.

Format:
Feed öffnen

Frühwarnungen sind Sicherheitsmeldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, zu Meldungen mit noch ausstehender CVE und zu Berichten, die noch nicht geprüft wurden. Die Verlässlichkeit zeigt, wie gut ein Eintrag geprüft ist: hoch, mittel oder niedrig.

Über dieses Dashboard

Das Dashboard führt einen eigenen Index aus Sicherheitsmeldungen und aktualisiert ihn alle 30 Minuten. Es führt die nationale Schwachstellendatenbank, Paket-Advisories, Malware-Meldungen und den Katalog aktiv ausgenutzter Schwachstellen zu einem Eintrag pro Problem zusammen. Meldungen zur selben Lücke werden gebündelt, damit nichts doppelt erscheint.

Öffne einen Eintrag, um alle Details zu sehen: Beschreibung, CVSS-Vektor, betroffene Pakete und Versionen, behobene Versionen, Schwachstellenklasse, Ausnutzungswahrscheinlichkeit und Referenzen.

Quellen: die GitHub Advisory Database (geprüfte Advisories, Malware-Meldungen und ungeprüfte Berichte), die National Vulnerability Database, das CVE Program (cve.org) für ganz neue Einträge, die OpenSSF-Liste schädlicher Pakete, der CISA-Katalog Known Exploited Vulnerabilities und die Sperrliste von Microsoft für schädliche VS-Code-Erweiterungen. Jeder Eintrag nennt seine Quellen auf der Detailseite.

Dieses Produkt nutzt die NVD-API, wird von der NVD aber weder unterstützt noch zertifiziert.

So liest du die Zahlen

  • Bedrohungslage: eine Einstufung aus den drei Zahlen daneben: kritische Meldungen der letzten 24 Stunden, in dieser Woche neu bestätigte ausgenutzte Schwachstellen und Malware-Meldungen dieser Woche. Sie dient der schnellen Orientierung und ist keine offizielle Warnstufe.
  • Schweregrad: Werte ab 9.0 gelten als kritisch, 7.0 bis 8.9 als hoch, 4.0 bis 6.9 als mittel und 0.1 bis 3.9 als niedrig. Der Schweregrad beschreibt, wie schwer eine Lücke allgemein wiegt. Ob die Komponente in deiner Umgebung erreichbar ist, berücksichtigt er nicht.
  • Bekannt ausgenutzt: Die Lücke wurde bei echten Angriffen ausgenutzt. Diese Einträge solltest du zuerst patchen. Bei Einträgen mit Patch-Frist siehst du, wie viele Tage noch bleiben.
  • Frühwarnungen: Meldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, geprüfte Advisories mit noch ausstehender CVE und Berichte, die noch nicht geprüft wurden.
  • Prioritätenliste: kritische und hohe Meldungen der letzten 7 Tage sowie alles, was neu ausgenutzt wird, sortiert nach Ausnutzung, Schweregrad und Score.

Häufige Fragen

Woher stammen die Daten?
Aus öffentlichen Schwachstellendatenbanken, Paket-Advisories und dem Katalog ausgenutzter Schwachstellen. NetSight sammelt sie alle 30 Minuten in einem eigenen Index und führt Doppelungen zusammen.
Wie prüfe ich, ob ich betroffen bin?
Suche nach deinem Produkt- oder Paketnamen, öffne den Eintrag und vergleiche deine installierte Version mit den betroffenen und den behobenen Versionen. Ein passender Produktname allein heißt noch nicht, dass deine Version betroffen ist.
Was bedeutet bekannt ausgenutzt?
Die Schwachstelle wurde bei echten Angriffen ausgenutzt. Solche Einträge tragen das Datum der Bestätigung und, falls vorhanden, eine Frist für das Einspielen des Patches.
Was ist eine Frühwarnung?
Eine Meldung, die vor oder ganz ohne CVE-Nummer erscheint, etwa zu einem Schadpaket oder ein geprüftes Advisory, dessen CVE noch aussteht. Du bekommst so einen Vorsprung, die Details können sich aber noch ändern.
Ist ein hoher Schweregrad immer dringender als ein niedriger?
Nein. Der Schweregrad misst die technische Auswirkung im Allgemeinen. Wie offen das betroffene System erreichbar ist, ob die Lücke bereits ausgenutzt wird und wie wahrscheinlich eine Ausnutzung ist, zählt genauso.
Kann ich neue Meldungen automatisch verfolgen?
Ja. Mit dem Feed-Baukasten weiter unten erstellst du einen RSS-, Atom- oder JSON-Feed, gefiltert nach Schweregrad, Technologie, Ökosystem oder Ausnutzungsstatus.