NetSight

Sicherheitslage

Ein aktuelles Lagebild zu neuen Schwachstellen, aktiv ausgenutzten Lücken und schädlichen Paketen.

Zurücksetzen
34 passende Meldungen · Seite 1 von 2Index aktualisiert vor 3 Minuten · Abonnieren · RSS
SchweregradIDTitelBetroffenAlter
mittel6.5 CVE-2026-58374 In hostapd before 2.12, a missing bounds check in AP-mode Wi-Fi 7 (IEEE 802.11be) Multi-Link Operation (MLO) association request processing allows an unauthent… w1.fi · hostapd 2026-06-30 mittel6.5 CVE-2022-37660 In hostapd 2.10 and earlier, the PKEX code remains active even after a successful PKEX association. w1.fi · hostapd 2025-02-11 mittel6.5 CVE-2023-52160 The implementation of PEAP in wpa_supplicant through 2.10 allows authentication bypass. debian · debian_linux, fedoraproject · fedora, redhat · enterprise_linux +1 2024-02-22 mittel5.3 CVE-2021-30004 In wpa_supplicant and hostapd 2.9, forging attacks may occur because AlgorithmIdentifier parameters are mishandled in tls/pkcs1.c and tls/x509v3.c. w1.fi · hostapd, w1.fi · wpa_supplicant 2021-04-02 mittel6.5 CVE-2019-5062 An exploitable denial-of-service vulnerability exists in the 802.11w security state handling for hostapd 2.6 connected clients with valid 802.11w sessions. w1.fi · hostapd 2019-12-12 mittel6.5 CVE-2019-5061 An exploitable denial-of-service vulnerability exists in the hostapd 2.6, where an attacker could trigger AP to send IAPP location updates for stations, before… w1.fi · hostapd 2019-12-12 mittel6.5 CVE-2019-16275 hostapd before 2.10 and wpa_supplicant before 2.10 allow an incorrect indication of disconnection in certain situations because source address validation is mi… w1.fi · hostapd, w1.fi · wpa_supplicant, debian · debian_linux +1 2019-09-12 mittel5.9 CVE-2019-13377 The implementations of SAE and EAP-pwd in hostapd and wpa_supplicant 2.x through 2.8 are vulnerable to side-channel attacks as a result of observable timing di… w1.fi · hostapd, fedoraproject · fedora, canonical · ubuntu_linux +1 2019-08-15 mittel5.9 CVE-2019-11555 The EAP-pwd implementation in hostapd (EAP server) before 2.8 and wpa_supplicant (EAP peer) before 2.8 does not validate fragmentation reassembly state properl… w1.fi · hostapd, w1.fi · wpa_supplicant 2019-04-26 mittel5.9 CVE-2019-9494 The implementations of SAE in hostapd and wpa_supplicant are vulnerable to side channel attacks as a result of observable timing differences and cache access p… w1.fi · hostapd, w1.fi · wpa_supplicant, fedoraproject · fedora +5 2019-04-17 mittel6.5 CVE-2018-14526 An issue was discovered in rsn_supp/wpa.c in wpa_supplicant 2.0 through 2.6. canonical · ubuntu_linux, debian · debian_linux, w1.fi · wpa_supplicant 2018-08-08 mittel5.9 CVE-2015-5316 The eap_pwd_perform_confirm_exchange function in eap_peer/eap_pwd.c in wpa_supplicant 2.x before 2.6, when EAP-pwd is enabled in a network configuration profil… w1.fi · wpa_supplicant, debian · debian_linux 2018-02-21 mittel5.9 CVE-2015-5315 The eap_pwd_process function in eap_peer/eap_pwd.c in wpa_supplicant 2.x before 2.6 does not validate that the reassembly buffer is large enough for the final … w1.fi · wpa_supplicant, debian · debian_linux 2018-02-21 mittel5.9 CVE-2015-5314 The eap_pwd_process function in eap_server/eap_server_pwd.c in hostapd 2.x before 2.6 does not validate that the reassembly buffer is large enough for the fina… w1.fi · wpa_supplicant, debian · debian_linux 2018-02-21 mittel5.3 CVE-2017-13088 Wi-Fi Protected Access (WPA and WPA2) that support 802.11v allows reinstallation of the Integrity Group Temporal Key (IGTK) when processing a Wireless Network … canonical · ubuntu_linux, debian · debian_linux, freebsd · freebsd +9 2017-10-17 mittel5.3 CVE-2017-13087 Wi-Fi Protected Access (WPA and WPA2) that support 802.11v allows reinstallation of the Group Temporal Key (GTK) when processing a Wireless Network Management … canonical · ubuntu_linux, debian · debian_linux, freebsd · freebsd +9 2017-10-17 mittel6.8 CVE-2017-13086 Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Tunneled Direct-Link Setup (TDLS) Peer Key (TPK) during the TDLS handshake, allowing an atta… canonical · ubuntu_linux, debian · debian_linux, freebsd · freebsd +9 2017-10-17 mittel6.8 CVE-2017-13084 Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Station-To-Station-Link (STSL) Transient Key (STK) during the PeerKey handshake, allowing an… canonical · ubuntu_linux, debian · debian_linux, freebsd · freebsd +9 2017-10-17 mittel5.3 CVE-2017-13081 Wi-Fi Protected Access (WPA and WPA2) that supports IEEE 802.11w allows reinstallation of the Integrity Group Temporal Key (IGTK) during the group key handshak… canonical · ubuntu_linux, debian · debian_linux, freebsd · freebsd +9 2017-10-17 mittel5.3 CVE-2017-13080 Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Group Temporal Key (GTK) during the group key handshake, allowing an attacker within radio r… canonical · ubuntu_linux, debian · debian_linux, freebsd · freebsd +9 2017-10-17 mittel5.3 CVE-2017-13079 Wi-Fi Protected Access (WPA and WPA2) that supports IEEE 802.11w allows reinstallation of the Integrity Group Temporal Key (IGTK) during the four-way handshake… canonical · ubuntu_linux, debian · debian_linux, freebsd · freebsd +9 2017-10-17 mittel5.3 CVE-2017-13078 Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Group Temporal Key (GTK) during the four-way handshake, allowing an attacker within radio ra… canonical · ubuntu_linux, debian · debian_linux, freebsd · freebsd +9 2017-10-17 mittel6.8 CVE-2017-13077 Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Pairwise Transient Key (PTK) Temporal Key (TK) during the four-way handshake, allowing an at… canonical · ubuntu_linux, debian · debian_linux, freebsd · freebsd +9 2017-10-17 mittel5.9 CVE-2015-0210 wpa_supplicant 2.0-16 does not properly check certificate subject name, which allows remote attackers to cause a man-in-the-middle attack. w1.fi · wpa_supplicant 2017-08-28 mittel5.0 CVE-2015-8041 Multiple integer overflows in the NDEF record parser in hostapd before 2.5 and wpa_supplicant before 2.5 allow remote attackers to cause a denial of service (p… w1.fi · wpa_supplicant, opensuse · opensuse, w1.fi · hostapd 2015-11-09 mittel5.0 CVE-2015-4146 The EAP-pwd peer implementation in hostapd and wpa_supplicant 1.0 through 2.4 does not clear the L (Length) and M (More) flags before determining if a response… w1.fi · wpa_supplicant, w1.fi · hostapd, opensuse · opensuse 2015-06-15 mittel5.0 CVE-2015-4145 The EAP-pwd server and peer implementation in hostapd and wpa_supplicant 1.0 through 2.4 does not validate a fragment is already being processed, which allows … w1.fi · hostapd, opensuse · opensuse, w1.fi · wpa_supplicant 2015-06-15 mittel5.0 CVE-2015-4144 The EAP-pwd server and peer implementation in hostapd and wpa_supplicant 1.0 through 2.4 does not validate that a message is long enough to contain the Total-L… opensuse · opensuse, w1.fi · hostapd, w1.fi · wpa_supplicant 2015-06-15 mittel5.0 CVE-2015-4143 The EAP-pwd server and peer implementation in hostapd and wpa_supplicant 1.0 through 2.4 allows remote attackers to cause a denial of service (out-of-bounds re… w1.fi · wpa_supplicant, w1.fi · hostapd, opensuse · opensuse 2015-06-15 mittel4.3 CVE-2015-4142 Integer underflow in the WMM Action frame parser in hostapd 0.5.5 through 2.4 and wpa_supplicant 0.7.0 through 2.4, when used for AP mode MLME/SME functionalit… w1.fi · wpa_supplicant, redhat · enterprise_linux_desktop, redhat · enterprise_linux_hpc_node +4 2015-06-15

Benachrichtigungen erhalten

Abonniere neue Schwachstellen und Frühwarnungen der letzten sieben Tage. Wähle aus, was für deinen Stack wichtig ist, und kopiere die Adresse in einen beliebigen Feedreader. Sobald du einen Typ auswählst, erscheinen weitere Filter.

Format:
Feed öffnen

Frühwarnungen sind Sicherheitsmeldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, zu Meldungen mit noch ausstehender CVE und zu Berichten, die noch nicht geprüft wurden. Die Verlässlichkeit zeigt, wie gut ein Eintrag geprüft ist: hoch, mittel oder niedrig.

Über dieses Dashboard

Das Dashboard führt einen eigenen Index aus Sicherheitsmeldungen und aktualisiert ihn alle 30 Minuten. Es führt die nationale Schwachstellendatenbank, Paket-Advisories, Malware-Meldungen und den Katalog aktiv ausgenutzter Schwachstellen zu einem Eintrag pro Problem zusammen. Meldungen zur selben Lücke werden gebündelt, damit nichts doppelt erscheint.

Öffne einen Eintrag, um alle Details zu sehen: Beschreibung, CVSS-Vektor, betroffene Pakete und Versionen, behobene Versionen, Schwachstellenklasse, Ausnutzungswahrscheinlichkeit und Referenzen.

Quellen: die GitHub Advisory Database (geprüfte Advisories, Malware-Meldungen und ungeprüfte Berichte), die National Vulnerability Database, das CVE Program (cve.org) für ganz neue Einträge, die OpenSSF-Liste schädlicher Pakete, der CISA-Katalog Known Exploited Vulnerabilities und die Sperrliste von Microsoft für schädliche VS-Code-Erweiterungen. Jeder Eintrag nennt seine Quellen auf der Detailseite.

Dieses Produkt nutzt die NVD-API, wird von der NVD aber weder unterstützt noch zertifiziert.

So liest du die Zahlen

  • Bedrohungslage: eine Einstufung aus den drei Zahlen daneben: kritische Meldungen der letzten 24 Stunden, in dieser Woche neu bestätigte ausgenutzte Schwachstellen und Malware-Meldungen dieser Woche. Sie dient der schnellen Orientierung und ist keine offizielle Warnstufe.
  • Schweregrad: Werte ab 9.0 gelten als kritisch, 7.0 bis 8.9 als hoch, 4.0 bis 6.9 als mittel und 0.1 bis 3.9 als niedrig. Der Schweregrad beschreibt, wie schwer eine Lücke allgemein wiegt. Ob die Komponente in deiner Umgebung erreichbar ist, berücksichtigt er nicht.
  • Bekannt ausgenutzt: Die Lücke wurde bei echten Angriffen ausgenutzt. Diese Einträge solltest du zuerst patchen. Bei Einträgen mit Patch-Frist siehst du, wie viele Tage noch bleiben.
  • Frühwarnungen: Meldungen, die vor oder ganz ohne CVE-Nummer erscheinen, etwa zu Schadpaketen, geprüfte Advisories mit noch ausstehender CVE und Berichte, die noch nicht geprüft wurden.
  • Prioritätenliste: kritische und hohe Meldungen der letzten 7 Tage sowie alles, was neu ausgenutzt wird, sortiert nach Ausnutzung, Schweregrad und Score.

Häufige Fragen

Woher stammen die Daten?
Aus öffentlichen Schwachstellendatenbanken, Paket-Advisories und dem Katalog ausgenutzter Schwachstellen. NetSight sammelt sie alle 30 Minuten in einem eigenen Index und führt Doppelungen zusammen.
Wie prüfe ich, ob ich betroffen bin?
Suche nach deinem Produkt- oder Paketnamen, öffne den Eintrag und vergleiche deine installierte Version mit den betroffenen und den behobenen Versionen. Ein passender Produktname allein heißt noch nicht, dass deine Version betroffen ist.
Was bedeutet bekannt ausgenutzt?
Die Schwachstelle wurde bei echten Angriffen ausgenutzt. Solche Einträge tragen das Datum der Bestätigung und, falls vorhanden, eine Frist für das Einspielen des Patches.
Was ist eine Frühwarnung?
Eine Meldung, die vor oder ganz ohne CVE-Nummer erscheint, etwa zu einem Schadpaket oder ein geprüftes Advisory, dessen CVE noch aussteht. Du bekommst so einen Vorsprung, die Details können sich aber noch ändern.
Ist ein hoher Schweregrad immer dringender als ein niedriger?
Nein. Der Schweregrad misst die technische Auswirkung im Allgemeinen. Wie offen das betroffene System erreichbar ist, ob die Lücke bereits ausgenutzt wird und wie wahrscheinlich eine Ausnutzung ist, zählt genauso.
Kann ich neue Meldungen automatisch verfolgen?
Ja. Mit dem Feed-Baukasten weiter unten erstellst du einen RSS-, Atom- oder JSON-Feed, gefiltert nach Schweregrad, Technologie, Ökosystem oder Ausnutzungsstatus.