NetSight

Security Dashboard

A live picture of new vulnerabilities, flaws exploited in the wild and malicious packages.

Reset
17 matching advisories · page 1 of 1Index updated 3 minutes ago · Subscribe · RSS
SeverityIDTitleAffectedAge
high7.8 CVE-2019-12456 An issue was discovered in the MPT3COMMAND case in _ctl_ioctl_main in drivers/scsi/mpt3sas/mpt3sas_ctl.c in the Linux kernel through 5.1.5. linux · linux_kernel 2019-05-30 high7.0 CVE-2013-4806 The OSPF implementation on HP JD9##A routers; HP J4###A, J484#B, J8###A, JD3##A, JE###A, and JF55#A switches; HP 3COM routers and switches; and HP H3C routers … hp · 3com_router, hp · 5500-24g-4sfp_hi_switch_with_2_interface_slots, hp · 5500-24g-poe_ei_switch +9 2013-08-12 high7.1 CVE-2013-2341 Unspecified vulnerability on the HP ProCurve JC###A, JC###B, JD###A, JD###B, JE###A, JF###A, JF###B, JF###C, JG###A, 658250-B21, and 658247-B21; HP 3COM router… hp · 3com_baseline_plus_switch, hp · 3com_router, hp · 3com_switch +9 2013-07-06 high7.8 CVE-2008-6395 The web management interface in 3Com Wireless 8760 Dual Radio 11a/b/g PoE Access Point allows remote attackers to cause a denial of service (device crash) via … 3com · wireless_8760_dual-radio 2009-03-04 high7.5 CVE-2007-3701 TippingPoint IPS before 20070710 does not properly handle a hex-encoded alternate Unicode '/' (slash) character, which might allow remote attackers to send cer… tippingpoint · tipping_point, 3com · tippingpoint_ips_tos 2007-07-11 high7.5 CVE-2007-3711 Unspecified vulnerability in TOS 2.1.x, 2.2.x before 2.2.5, and 2.5.x before 2.5.2 on TippingPoint IPS allows remote attackers to avoid detection by sending ce… 3com · tippingpoint_ips_tos 2007-07-11 high7.5 CVE-2007-2734 The 3Com TippingPoint IPS do not properly handle certain full-width and half-width Unicode character encodings in an HTTP POST request, which might allow remot… 3com · 3crtpx505-73, 3com · 3crx506-96, 3com · tippingpoint_200 +5 2007-05-16 high7.8 CVE-2007-2276 3Com TippingPoint IPS allows remote attackers to cause a denial of service (device hang) via a flood of packets on TCP port 80 with sequentially increasing sou… 3com · tippingpoint_ips 2007-04-25 high7.5 CVE-2006-5382 3Com Switch SS3 4400 switches, firmware 5.11, 6.00 and 6.10 and earlier, allow remote attackers to read the SNMP Read-Write Community string and conduct unauth… 3com · superstack_3_switch_4400 2006-10-25 high7.5 CVE-2005-0419 Multiple heap-based buffer overflows in 3Com 3CServer allow remote authenticated users to execute arbitrary code via long FTP commands, as demonstrated using t… 3com · 3cserver 2005-04-27 high7.1 CVE-2004-2691 Unspecified vulnerability in 3Com SuperStack 3 4400 switches with firmware version before 3.31 allows remote attackers to cause a denial of service (device res… 3com · 3c17205-us, 3com · 3c17210-us, 3com · superstack_3_switch 2004-12-31 high7.5 CVE-2004-1596 The 3COM Wireless router 3CRADSL72 running Boot Code 1.3d allows remote attackers to gain sensitive information such as passwords and router settings via a dir… 3com · 3cradsl72 2004-10-13 high7.5 CVE-2002-2300 Buffer overflow in ftpd 5.4 in 3Com NBX 4.0.17 or ftpd 5.4.2 in 3Com NBX 4.1.4 allows remote attackers to cause a denial of service (crash) via a long CEL comm… 3com · webbngss3nbxnts 2002-12-31 high7.5 CVE-2002-0888 3Com OfficeConnect Remote 812 ADSL Router, firmware 1.1.9 and 1.1.7, allows remote attackers to bypass port access restrictions by connecting to an approved po… 3com · 3cp4144 2002-10-04 high7.5 CVE-2002-0606 Buffer overflow in 3Cdaemon 2.0 FTP server allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via long commands s… 3com · 3cdaemon 2002-06-18 high7.5 CVE-1999-1513 Management information base (MIB) for a 3Com SuperStack II hub running software version 2.10 contains an object identifier (.1.3.6.1.4.1.43.10.4.2) that is acc… 3com · superstack_ii_hub 1999-08-30 high7.5 CVE-1999-1389 US Robotics/3Com Total Control Chassis with Frame Relay between 3.6.22 and 3.7.24 does not properly enforce access filters when the "set host prompt" setting i… 3com · total_control_netserver_card 1998-05-11

Get notifications

Subscribe to new vulnerabilities and early warnings from the last seven days. Pick what matters to your stack and copy the address into any feed reader. More filters appear when you pick a type.

Format:
Open feed

Early warnings are advisories that are published before or without a CVE number, for example malicious packages, advisories with a CVE still pending and reports that are not reviewed yet. Confidence says how well an entry is checked: high, medium or low.

About this dashboard

The dashboard keeps its own index of security advisories and refreshes it every 30 minutes. It merges the national vulnerability database, package advisories, malware reports and the catalog of vulnerabilities that are exploited in the wild into one record per issue. Reports about the same flaw are combined, so nothing is listed twice.

Open any entry for the full record: description, severity vector, affected packages and versions, fixed versions, weakness class, exploitation probability and references.

Sources: the GitHub Advisory Database (reviewed advisories, malware reports and unreviewed reports), the National Vulnerability Database, the CVE Program (cve.org) for brand-new records, the OpenSSF malicious packages list, the CISA catalog of Known Exploited Vulnerabilities and Microsoft's blocklist of malicious VS Code extensions. Every entry names its sources on its detail page.

This product uses the NVD API but is not endorsed or certified by the NVD.

Reading the figures

  • Threat level: a rating computed from three numbers shown next to it: critical advisories in the last 24 hours, vulnerabilities newly confirmed as exploited this week and malware reports this week. It is a quick orientation, not an official warning level.
  • Severity: scores from 9.0 are critical, 7.0 to 8.9 high, 4.0 to 6.9 medium and 0.1 to 3.9 low. Severity describes how bad a flaw is in general. It does not know whether the component is reachable in your environment.
  • Known exploited: exploitation has been observed in real attacks. These are the entries to patch first. Entries with a fix deadline show how many days are left.
  • Early warnings: advisories that appear before or without a CVE number, for example malicious packages, reviewed advisories with a CVE still pending and reports that are not reviewed yet.
  • Priority queue: critical and high advisories of the last 7 days and everything newly exploited, ordered by exploitation status, severity and score.

Questions

Where does the data come from?
From public vulnerability databases, package advisories and the catalog of exploited vulnerabilities. NetSight collects them into its own index every 30 minutes and merges duplicates.
How do I check whether I am affected?
Search for your product or package name, open the record and compare your installed version with the affected and fixed versions. A product name alone does not mean your version is affected.
What does known exploited mean?
Exploitation of this vulnerability has been observed in real attacks. Such entries carry a date they were confirmed and, where one exists, a deadline for applying the fix.
What is an early warning?
An advisory that is published before or without a CVE number, such as a malicious package or a reviewed advisory whose CVE is still pending. They give you a head start, but the details can change.
Is a high severity always more urgent than a low one?
No. Severity measures technical impact in general. Exposure of the affected system, observed exploitation and the exploitation probability matter as much.
Can I follow new advisories automatically?
Yes. Use the notification builder further down to create an RSS, Atom or JSON feed filtered by severity, technology, ecosystem or exploitation status.