NetSight

Security Dashboard

A live picture of new vulnerabilities, flaws exploited in the wild and malicious packages.

Reset
22 matching advisories · page 1 of 1Index updated just now · Subscribe · RSS
SeverityIDTitleAffectedAge
low3.3 CVE-2026-102621 A vulnerability was identified in Freedesktop Poppler up to 26.08.0. Freedesktop Poppler 53 days ago low3.3 CVE-2026-102620 A vulnerability was determined in Freedesktop Poppler 26.06.0/26.07.0/26.08.0. 53 days ago low3.3 CVE-2026-96283 By calling org.freedesktop.Flatpak.SystemHelper.CancelPull on another user's pull, the pull is not actually cancelled but removed from internal tracking, makin… 55 days ago low3.3 CVE-2026-35094 A flaw was found in libinput. freedesktop · libinput, fedoraproject · fedora 2026-04-01 low2.8 CVE-2020-16127 An Ubuntu-specific modification to AccountsService in versions before 0.6.55-0ubuntu13.2, among other earlier versions, would perform unbounded read operations… freedesktop · accountsservice 2020-11-11 low3.3 CVE-2020-16126 An Ubuntu-specific modification to AccountsService in versions before 0.6.55-0ubuntu13.2, among other earlier versions, improperly dropped the ruid, allowing u… freedesktop · accountsservice 2020-11-11 low1.9 CVE-2015-0245 D-Bus 1.4.x through 1.6.x before 1.6.30, 1.8.x before 1.8.16, and 1.9.x before 1.9.10 does not validate the source of ActivationFailure signals, which allows l… freedesktop · dbus, opensuse · opensuse 2015-02-13 low2.1 CVE-2014-7824 D-Bus 1.3.0 through 1.6.x before 1.6.26, 1.8.x before 1.8.10, and 1.9.x before 1.9.2 allows local users to cause a denial of service (prevention of new connect… freedesktop · dbus, debian · debian_linux, mageia_project · mageia +1 2014-11-18 low1.9 CVE-2014-3636 D-Bus 1.3.0 through 1.6.x before 1.6.24 and 1.8.x before 1.8.8 allows local users to (1) cause a denial of service (prevention of new connections and connectio… d-bus_project · d-bus, freedesktop · dbus, opensuse · opensuse 2014-10-25 low2.1 CVE-2014-3639 The dbus-daemon in D-Bus before 1.6.24 and 1.8.x before 1.8.8 does not properly close old connections, which allows local users to cause a denial of service (i… opensuse · opensuse, d-bus_project · d-bus, freedesktop · dbus 2014-09-22 low2.1 CVE-2014-3638 The bus_connections_check_reply function in config-parser.c in D-Bus before 1.6.24 and 1.8.x before 1.8.8 allows local users to cause a denial of service (CPU … d-bus_project · d-bus, freedesktop · dbus, opensuse · opensuse 2014-09-22 low2.1 CVE-2014-3637 D-Bus 1.3.0 through 1.6.x before 1.6.24 and 1.8.x before 1.8.8 does not properly close connections for processes that have terminated, which allows local users… freedesktop · dbus, opensuse · opensuse 2014-09-22 low2.1 CVE-2014-3533 dbus 1.3.0 before 1.6.22 and 1.8.x before 1.8.6 allows local users to cause a denial of service (disconnect) via a certain sequence of crafted messages that ca… debian · debian_linux, freedesktop · dbus, mageia_project · mageia +1 2014-07-19 low2.1 CVE-2014-3532 dbus 1.3.0 before 1.6.22 and 1.8.x before 1.8.6, when running on Linux 2.6.37-rc4 or later, allows local users to cause a denial of service (system-bus disconn… freedesktop · dbus, opensuse · opensuse, debian · debian_linux +2 2014-07-19 low3.3 CVE-2013-4472 The openTempFile function in goo/gfile.cc in Xpdf and Poppler 0.24.3 and earlier, when running on a system other than Unix, allows local users to overwrite arb… freedesktop · poppler 2014-04-22 low1.9 CVE-2013-2168 The _dbus_printf_string_upper_bound function in dbus/dbus-sysdeps-unix.c in D-Bus (aka DBus) 1.4.x before 1.4.26, 1.6.x before 1.6.12, and 1.7.x before 1.7.4 a… freedesktop · dbus, opensuse · opensuse 2013-07-03 low3.3 CVE-2011-2533 The configure script in D-Bus (aka DBus) 1.2.x before 1.2.28 allows local users to overwrite arbitrary files via a symlink attack on an unspecified file in /tm… freedesktop · dbus 2011-06-22 low3.6 CVE-2010-1172 DBus-GLib 0.73 disregards the access flag of exported GObject properties, which allows local users to bypass intended access restrictions and possibly cause a … freedesktop · dbus-glib 2010-08-20 low2.1 CVE-2010-1149 probers/udisks-dm-export.c in udisks before 1.0.1 exports UDISKS_DM_TARGETS_PARAMS information to udev even for a crypt UDISKS_DM_TARGETS_TYPE, which allows lo… freedesktop · udisks 2010-04-12 low2.1 CVE-2010-0750 pkexec.c in pkexec in libpolkit in PolicyKit 0.96 allows local users to determine the existence of arbitrary files via the argument. freedesktop · policykit 2010-04-06 low3.6 CVE-2009-1189 The _dbus_validate_signature_with_reason function (dbus-marshal-validate.c) in D-Bus (aka DBus) before 1.2.14 uses incorrect logic to validate a basic type, wh… freedesktop · dbus 2009-04-27 low2.1 CVE-2008-3834 The dbus_signature_validate function in the D-bus library (libdbus) before 1.2.4 allows remote attackers to cause a denial of service (application abort) via a… freedesktop · dbus, freedesktop · dbus1.0, freedesktop · dbus1.1.0 2008-10-07

Get notifications

Subscribe to new vulnerabilities and early warnings from the last seven days. Pick what matters to your stack and copy the address into any feed reader. More filters appear when you pick a type.

Format:
Open feed

Early warnings are advisories that are published before or without a CVE number, for example malicious packages, advisories with a CVE still pending and reports that are not reviewed yet. Confidence says how well an entry is checked: high, medium or low.

About this dashboard

The dashboard keeps its own index of security advisories and refreshes it every 30 minutes. It merges the national vulnerability database, package advisories, malware reports and the catalog of vulnerabilities that are exploited in the wild into one record per issue. Reports about the same flaw are combined, so nothing is listed twice.

Open any entry for the full record: description, severity vector, affected packages and versions, fixed versions, weakness class, exploitation probability and references.

Sources: the GitHub Advisory Database (reviewed advisories, malware reports and unreviewed reports), the National Vulnerability Database, the CVE Program (cve.org) for brand-new records, the OpenSSF malicious packages list, the CISA catalog of Known Exploited Vulnerabilities and Microsoft's blocklist of malicious VS Code extensions. Every entry names its sources on its detail page.

This product uses the NVD API but is not endorsed or certified by the NVD.

Reading the figures

  • Threat level: a rating computed from three numbers shown next to it: critical advisories in the last 24 hours, vulnerabilities newly confirmed as exploited this week and malware reports this week. It is a quick orientation, not an official warning level.
  • Severity: scores from 9.0 are critical, 7.0 to 8.9 high, 4.0 to 6.9 medium and 0.1 to 3.9 low. Severity describes how bad a flaw is in general. It does not know whether the component is reachable in your environment.
  • Known exploited: exploitation has been observed in real attacks. These are the entries to patch first. Entries with a fix deadline show how many days are left.
  • Early warnings: advisories that appear before or without a CVE number, for example malicious packages, reviewed advisories with a CVE still pending and reports that are not reviewed yet.
  • Priority queue: critical and high advisories of the last 7 days and everything newly exploited, ordered by exploitation status, severity and score.

Questions

Where does the data come from?
From public vulnerability databases, package advisories and the catalog of exploited vulnerabilities. NetSight collects them into its own index every 30 minutes and merges duplicates.
How do I check whether I am affected?
Search for your product or package name, open the record and compare your installed version with the affected and fixed versions. A product name alone does not mean your version is affected.
What does known exploited mean?
Exploitation of this vulnerability has been observed in real attacks. Such entries carry a date they were confirmed and, where one exists, a deadline for applying the fix.
What is an early warning?
An advisory that is published before or without a CVE number, such as a malicious package or a reviewed advisory whose CVE is still pending. They give you a head start, but the details can change.
Is a high severity always more urgent than a low one?
No. Severity measures technical impact in general. Exposure of the affected system, observed exploitation and the exploitation probability matter as much.
Can I follow new advisories automatically?
Yes. Use the notification builder further down to create an RSS, Atom or JSON feed filtered by severity, technology, ecosystem or exploitation status.