NetSight

Security Dashboard

A live picture of new vulnerabilities, flaws exploited in the wild and malicious packages.

Reset
26 matching advisories · page 1 of 1Index updated 2 minutes ago · Subscribe · RSS
SeverityIDTitleAffectedAge
high7.5 CVE-2026-66282 In EmberZNet 9.1.1 and earlier, a malformed Publish Billing Period command can result in a recursive function call that will never reach its end condition. silabs · emberznet 30 days ago high7.5 CVE-2026-66281 In EmberZNet 9.1.1 and earlier, a malformed Discover Attributes command can result in a loop with unreachable exit condition (infinite loop). silabs · emberznet 30 days ago high7.0 CVE-2026-15419 In the silabser.sys driver for CP210x devices v11.5.0 and earlier, a local unprivileged user with a malicious device can use malformed packets to corrupt kerne… 2026-09-10 high7.1 CVE-2026-47151 In EmberZNet v9.0.2 and earlier, malformed ClearWeekdaySchedule messages can trigger out-of-bounds writes into Door Lock schedule state. silabs · emberznet 2026-06-25 high7.1 CVE-2026-47150 In EmberZNet v9.0.2 and earlier, malformed IAS Zone enrollment messages can trigger an out-of-bounds state-table write and terminate the process. silabs · emberznet 2026-06-25 high7.1 CVE-2026-47147 In EmberZNet v9.0.2 and earlier, malformed OTA requests can drive the OTA server parser into out-of-bounds reads. silabs · emberznet 2026-06-25 high8.8 CVE-2025-2837 Silicon Labs Gecko OS HTTP Request Handling Stack-based Buffer Overflow Remote Code Execution Vulnerability. silabs · gecko_os 2025-03-26 high7.5 CVE-2024-24731 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Silicon Labs Gecko OS. silabs · gecko_os 2025-01-31 high8.8 CVE-2024-23973 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Silicon Labs Gecko OS. silabs · gecko_os 2025-01-31 high8.8 CVE-2024-50930 An issue in Silicon Labs Z-Wave Series 500 v6.84.0 allows attackers to execute arbitrary code. silabs · z-wave_software_development_kit 2024-12-10 high8.8 CVE-2024-50920 Insecure permissions in Silicon Labs (SiLabs) Z-Wave Series 700 and 800 v7.21.1 allow attackers to create a fake node via supplying crafted packets. silabs · z-wave_software_development_kit 2024-12-10 high8.8 CVE-2024-23938 Silicon Labs Gecko OS Debug Interface Stack-based Buffer Overflow Remote Code Execution Vulnerability. silabs · gecko_os 2024-09-28 high7.5 CVE-2023-6874 Prior to v7.4.0, Ember ZNet is vulnerable to a denial of service attack through manipulation of the NWK sequence number silabs · gecko_software_development_kit 2024-02-05 high7.5 CVE-2023-6387 A potential buffer overflow exists in the Bluetooth LE HCI CPC sample application in the Gecko SDK which may result in a denial of service or remote code execu… silabs · gecko_software_development_kit 2024-02-02 high7.7 CVE-2023-24585 An out-of-bounds write vulnerability exists in the HTTP Server functionality of Weston Embedded uC-HTTP v3.01.01. silabs · gecko_software_development_kit, weston-embedded · cesium_net, weston-embedded · uc-http 2023-11-14 high7.7 CVE-2023-3487 An integer overflow in Silicon Labs Gecko Bootloader version 4.3.1 and earlier allows unbounded memory access when reading from or writing to storage slots. silabs · gecko_bootloader 2023-10-20 high7.1 CVE-2023-0970 Multiple buffer overflow vulnerabilities in SiLabs Z/IP Gateway SDK version 7.18.01 and earlier allow an attacker with invasive physical access to a Z-Wave con… silabs · z\/ip_gateway_sdk 2023-06-21 high8.2 CVE-2023-1262 Missing MAC layer security in Silicon Labs Wi-SUN Linux Border Router v1.5.2 and earlier allows malicious node to route malicious messages through network. silabs · wireless_smart_ubiquitous_network_linux_border_router_firmware 2023-03-21 high8.2 CVE-2023-1261 Missing MAC layer security in Silicon Labs Wi-SUN SDK v1.5.0 and earlier allows malicious node to route malicious messages through network. silabs · wi-sun_software_development_kit 2023-03-21 high8.3 CVE-2022-24936 Out-of-Bounds error in GBL parser in Silicon Labs Gecko Bootloader version 4.0.1 and earlier allows attacker to overwrite flash Sign key and OTA decryption key… silabs · gecko_bootloader 2022-11-02 high8.1 CVE-2018-25029 The Z-Wave specification requires that S2 security can be downgraded to S0 or other less secure protocols, allowing an attacker within radio range during pairi… silabs · zgm130s037hgn_firmware, silabs · zm5202_firmware, silabs · zm5101_firmware +2 2022-02-04 high8.3 CVE-2013-20003 Z-Wave devices from Sierra Designs (circa 2013) and Silicon Labs (using S0 security) may use a known, shared network key of all zeros, allowing an attacker wit… silabs · zgm130s037hgn_firmware, silabs · zm5202_firmware, silabs · zm5101_firmware +2 2022-02-04 high8.1 CVE-2020-9058 Z-Wave devices based on Silicon Labs 500 series chipsets using CRC-16 encapsulation, including but likely not limited to the Linear LB60Z-1 version 3.5, Dome D… silabs · 500_series_firmware, dome · dm501, jasco · zw4201 +1 2022-01-10 high8.8 CVE-2020-9057 Z-Wave devices based on Silicon Labs 100, 200, and 300 series chipsets do not support encryption, allowing an attacker within radio range to take control of or… linear · wadwaz-1, linear · wapirz-1, silabs · 100_series_firmware +2 2022-01-10 high7.5 CVE-2020-13582 A denial-of-service vulnerability exists in the HTTP Server functionality of Micrium uC-HTTP 3.01.00. silabs · micrium_uc-http 2021-01-26 high8.8 CVE-2020-15531 Silicon Labs Bluetooth Low Energy SDK before 2.13.3 has a buffer overflow via packet data. silabs · bluetooth_low_energy_software_development_kit 2020-08-20

Get notifications

Subscribe to new vulnerabilities and early warnings from the last seven days. Pick what matters to your stack and copy the address into any feed reader. More filters appear when you pick a type.

Format:
Open feed

Early warnings are advisories that are published before or without a CVE number, for example malicious packages, advisories with a CVE still pending and reports that are not reviewed yet. Confidence says how well an entry is checked: high, medium or low.

About this dashboard

The dashboard keeps its own index of security advisories and refreshes it every 30 minutes. It merges the national vulnerability database, package advisories, malware reports and the catalog of vulnerabilities that are exploited in the wild into one record per issue. Reports about the same flaw are combined, so nothing is listed twice.

Open any entry for the full record: description, severity vector, affected packages and versions, fixed versions, weakness class, exploitation probability and references.

Sources: the GitHub Advisory Database (reviewed advisories, malware reports and unreviewed reports), the National Vulnerability Database, the CVE Program (cve.org) for brand-new records, the OpenSSF malicious packages list, the CISA catalog of Known Exploited Vulnerabilities and Microsoft's blocklist of malicious VS Code extensions. Every entry names its sources on its detail page.

This product uses the NVD API but is not endorsed or certified by the NVD.

Reading the figures

  • Threat level: a rating computed from three numbers shown next to it: critical advisories in the last 24 hours, vulnerabilities newly confirmed as exploited this week and malware reports this week. It is a quick orientation, not an official warning level.
  • Severity: scores from 9.0 are critical, 7.0 to 8.9 high, 4.0 to 6.9 medium and 0.1 to 3.9 low. Severity describes how bad a flaw is in general. It does not know whether the component is reachable in your environment.
  • Known exploited: exploitation has been observed in real attacks. These are the entries to patch first. Entries with a fix deadline show how many days are left.
  • Early warnings: advisories that appear before or without a CVE number, for example malicious packages, reviewed advisories with a CVE still pending and reports that are not reviewed yet.
  • Priority queue: critical and high advisories of the last 7 days and everything newly exploited, ordered by exploitation status, severity and score.

Questions

Where does the data come from?
From public vulnerability databases, package advisories and the catalog of exploited vulnerabilities. NetSight collects them into its own index every 30 minutes and merges duplicates.
How do I check whether I am affected?
Search for your product or package name, open the record and compare your installed version with the affected and fixed versions. A product name alone does not mean your version is affected.
What does known exploited mean?
Exploitation of this vulnerability has been observed in real attacks. Such entries carry a date they were confirmed and, where one exists, a deadline for applying the fix.
What is an early warning?
An advisory that is published before or without a CVE number, such as a malicious package or a reviewed advisory whose CVE is still pending. They give you a head start, but the details can change.
Is a high severity always more urgent than a low one?
No. Severity measures technical impact in general. Exposure of the affected system, observed exploitation and the exploitation probability matter as much.
Can I follow new advisories automatically?
Yes. Use the notification builder further down to create an RSS, Atom or JSON feed filtered by severity, technology, ecosystem or exploitation status.