NetSight

Security Dashboard

A live picture of new vulnerabilities, flaws exploited in the wild and malicious packages.

Reset
124 matching advisories · page 1 of 5Index updated 3 minutes ago · Subscribe · RSS
SeverityIDTitleAffectedAge
high7.5 CVE-2026-95826 The SMSC911x/LAN9220 Ethernet driver stages every outgoing frame in a fixed-size static buffer before pushing it to the controller FIFO. zephyrproject · zephyr, zephyrproject-rtos · Zephyr 22 hours ago high7.5 CVE-2026-95823 tcp_pkt_linearize() in subsys/net/ip/tcp.c is used by th_get() whenever a received TCP header is not contiguous in a single net_buf. zephyrproject · zephyr, zephyrproject-rtos · Zephyr 3 days ago high7.8 CVE-2026-91007 The user-mode syscall verifiers for the charger driver API in drivers/charger/charger_handlers.c did not inspect the prop argument before copying union charger… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 9 days ago high7.8 CVE-2026-90833 The simulated EEPROM driver validated access ranges in eeprom_range_is_valid() (drivers/eeprom/eeprom_simulator.c) with a single test, (offset + len) <= config… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 11 days ago high8.3 CVE-2026-77685 The RFCOMM multiplexer control-channel handler in subsys/bluetooth/host/classic/rfcomm.c computed the echo length for a BT_RFCOMM_TEST command as buf->len - 1 … zephyrproject · zephyr, zephyrproject-rtos · Zephyr 11 days ago high7.5 CVE-2026-90591 The NXP ENET-QOS Ethernet driver's receive work handler eth_nxp_enet_qos_rx() in drivers/ethernet/eth_nxp_enet_qos hands each processed descriptor back to the … zephyrproject · zephyr, zephyrproject-rtos · Zephyr 12 days ago high7.8 CVE-2026-90586 The Xtensa MMU userspace port never initialized the per-thread page-table pointer thread->arch.ptables during thread setup, while arch_mem_domain_thread_add() … zephyrproject · zephyr, zephyrproject-rtos · Zephyr 12 days ago high7.5 CVE-2026-87045 The HTTP/2 server in subsys/net/lib/http/http_server_http2.c clears the connection's stream binding at the start of every frame. zephyrproject-rtos · Zephyr, zephyrproject · zephyr 15 days ago high7.8 CVE-2026-87041 The RTIO submission-queue verifier rtio_vrfy_sqe() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) accumulated the results of K_SYSC… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 17 days ago high8.3 CVE-2026-87040 The nRF link-layer receive paths of the open-source Bluetooth LE Controller did not validate the on-air LENGTH field of a received PDU against the maximum rece… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 17 days ago high7.8 CVE-2026-87039 The user-mode syscall verifier z_vrfy_i2s_configure() in drivers/i2s/i2s_handlers.c copies the caller's struct i2s_config in from user memory and then, when cf… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 17 days ago high7.0 CVE-2026-87038 The user-mode verification handler for the i3c_transfer() system call, z_vrfy_i3c_transfer() in drivers/i3c/i3c_handlers.c, validated the caller-supplied struc… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 17 days ago high8.8 CVE-2026-16511 Two RTIO syscall verifiers, in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0), did not validate user-supplied pointers before the kern… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 17 days ago high8.8 CVE-2026-85035 The can_add_rx_filter_msgq() system call installs a CAN RX filter whose callback (can_msgq_put() in drivers/can/can_common.c) is handed the caller's struct k_m… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 18 days ago high7.8 CVE-2026-82961 The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. zephyrproject-rtos · Zephyr, zephyrproject · zephyr 24 days ago high7.1 CVE-2026-81038 The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp… zephyrproject · zephyr 26 days ago high8.8 CVE-2026-79982 The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 29 days ago high7.8 CVE-2026-79979 The arm64 MMU backend invalidates a single virtual address from the TLB with invalidate_tlb_page() in arch/arm64/core/mmu.c, which issued TLBI VAE1{IS} with an… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 29 days ago high8.2 CVE-2026-79977 The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. zephyrproject · zephyr, zephyrproject-rtos · Zephyr 29 days ago high7.5 CVE-2026-19741 Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/open… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 29 days ago high7.1 CVE-2026-79976 The MCTP-over-I2C+GPIO target binding in subsys/pmci/mctp/mctp_i2c_gpio_target.c emulates a small pseudo-register file, where the bus controller first writes a… zephyrproject · zephyr 31 days ago high7.8 CVE-2026-19676 The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission a… zephyrproject · zephyr 31 days ago high8.8 CVE-2026-76788 The OSDP Control Panel reply parser cp_decode_response() in subsys/mgmt/osdp/src/osdp_cp.c decodes replies from a Peripheral Device into a stack-allocated stru… zephyrproject · zephyr 33 days ago high7.5 CVE-2026-19935 The Bluetooth LE host queues received L2CAP connection-oriented channel (CoC) data for deferred processing through a struct k_work embedded in the channel obje… zephyrproject · zephyr 41 days ago high7.8 CVE-2026-19736 The NXP MCUX TRNG entropy driver in drivers/entropy/entropy_mcux_trng.c passed the caller's byte count straight to the vendor SDK routine TRNG_GetRandomData(). zephyrproject · zephyr 41 days ago high7.8 CVE-2026-19669 The user-mode syscall verifiers z_vrfy_fuel_gauge_get_props() and z_vrfy_fuel_gauge_set_props() in drivers/fuel_gauge/fuel_gauge_syscall_handlers.c declared tw… zephyrproject · zephyr 41 days ago high7.8 CVE-2026-19575 The user-mode verification handler for the device_deinit() system call, z_vrfy_device_deinit() in kernel/device.c, validated its dev argument with K_SYSCALL_OB… zephyrproject · zephyr 43 days ago high8.8 CVE-2026-19569 dynamic_object_create() in kernel/userspace/userspace.c computed the backing allocation for a dynamically allocated kernel object as obj_size_get(otype) + size… zephyrproject · zephyr 43 days ago high7.0 CVE-2026-19574 The ARM64 MMU back-end allocated address space identifiers (ASIDs) for memory domains with a bare round-robin counter in arch_mem_domain_init() (arch/arm64/cor… zephyrproject · zephyr 43 days ago high8.8 CVE-2026-19570 The LE Audio Broadcast Sink in subsys/bluetooth/audio/bap_broadcast_sink.c copies subgroup metadata from a received Basic Audio Announcement (BASE) into the st… zephyrproject · zephyr 43 days ago

Get notifications

Subscribe to new vulnerabilities and early warnings from the last seven days. Pick what matters to your stack and copy the address into any feed reader. More filters appear when you pick a type.

Format:
Open feed

Early warnings are advisories that are published before or without a CVE number, for example malicious packages, advisories with a CVE still pending and reports that are not reviewed yet. Confidence says how well an entry is checked: high, medium or low.

About this dashboard

The dashboard keeps its own index of security advisories and refreshes it every 30 minutes. It merges the national vulnerability database, package advisories, malware reports and the catalog of vulnerabilities that are exploited in the wild into one record per issue. Reports about the same flaw are combined, so nothing is listed twice.

Open any entry for the full record: description, severity vector, affected packages and versions, fixed versions, weakness class, exploitation probability and references.

Sources: the GitHub Advisory Database (reviewed advisories, malware reports and unreviewed reports), the National Vulnerability Database, the CVE Program (cve.org) for brand-new records, the OpenSSF malicious packages list, the CISA catalog of Known Exploited Vulnerabilities and Microsoft's blocklist of malicious VS Code extensions. Every entry names its sources on its detail page.

This product uses the NVD API but is not endorsed or certified by the NVD.

Reading the figures

  • Threat level: a rating computed from three numbers shown next to it: critical advisories in the last 24 hours, vulnerabilities newly confirmed as exploited this week and malware reports this week. It is a quick orientation, not an official warning level.
  • Severity: scores from 9.0 are critical, 7.0 to 8.9 high, 4.0 to 6.9 medium and 0.1 to 3.9 low. Severity describes how bad a flaw is in general. It does not know whether the component is reachable in your environment.
  • Known exploited: exploitation has been observed in real attacks. These are the entries to patch first. Entries with a fix deadline show how many days are left.
  • Early warnings: advisories that appear before or without a CVE number, for example malicious packages, reviewed advisories with a CVE still pending and reports that are not reviewed yet.
  • Priority queue: critical and high advisories of the last 7 days and everything newly exploited, ordered by exploitation status, severity and score.

Questions

Where does the data come from?
From public vulnerability databases, package advisories and the catalog of exploited vulnerabilities. NetSight collects them into its own index every 30 minutes and merges duplicates.
How do I check whether I am affected?
Search for your product or package name, open the record and compare your installed version with the affected and fixed versions. A product name alone does not mean your version is affected.
What does known exploited mean?
Exploitation of this vulnerability has been observed in real attacks. Such entries carry a date they were confirmed and, where one exists, a deadline for applying the fix.
What is an early warning?
An advisory that is published before or without a CVE number, such as a malicious package or a reviewed advisory whose CVE is still pending. They give you a head start, but the details can change.
Is a high severity always more urgent than a low one?
No. Severity measures technical impact in general. Exposure of the affected system, observed exploitation and the exploitation probability matter as much.
Can I follow new advisories automatically?
Yes. Use the notification builder further down to create an RSS, Atom or JSON feed filtered by severity, technology, ecosystem or exploitation status.