NetSight

Security Dashboard

A live picture of new vulnerabilities, flaws exploited in the wild and malicious packages.

Reset
29 matching advisories · page 1 of 1Index updated 4 minutes ago · Subscribe · RSS
SeverityIDTitleAffectedAge
low3.3 CVE-2026-95822 The SOCKS5 client in subsys/net/lib/socks/socks.c built the CONNECT request in socks5_tcp_connect() by choosing the SOCKS5 address type from the address family… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 4 days ago low3.7 CVE-2026-93671 The websocket client's HTTP header callback on_header_value() in subsys/net/lib/websocket/websocket.c receives the Sec-WebSocket-Accept header value as a point… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 5 days ago low3.5 CVE-2026-93670 The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhaust… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 5 days ago low3.3 CVE-2026-19809 The user-mode system call verifier z_vrfy_charger_get_prop() in drivers/charger/charger_handlers.c declares an uninitialized union charger_propval k_val on the… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 9 days ago low3.7 CVE-2026-90588 The HTTP client's debug helper print_header_field() in subsys/net/lib/http/http_client.c formatted an http_parser data-callback slice with a %s conversion: snp… zephyrproject · zephyr, zephyrproject-rtos · Zephyr 12 days ago low3.7 CVE-2026-82390 The Espressif AES driver drivers/crypto/crypto_esp32_aes.c advertises a multi-session cipher API — it hands out up to CONFIG_ESP32_CRYPTO_AES_SESSIONS_MAX (def… zephyrproject · zephyr 26 days ago low3.7 CVE-2026-19742 The IPv6 stack derived the long-lived secret key used to compute RFC 7217 stable interface identifiers (gen_stable_iid() in subsys/net/ip/ipv6.c) and RFC 8981 … zephyrproject · zephyr 26 days ago low3.6 CVE-2026-79978 The RTIO streaming completion callback adxl345_process_fifo_samples_cb() in drivers/sensor/adi/adxl345/adxl345_stream.c clamps the amount of FIFO data it will … zephyrproject · zephyr, zephyrproject-rtos · Zephyr 29 days ago low3.5 CVE-2026-18748 The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. zephyrproject · zephyr 31 days ago low3.7 CVE-2026-18416 The CoAP link-format helper match_path_uri() in subsys/net/lib/coap/coap_link_format.c compares a registered resource path against the URI carried in a Uri-Que… zephyrproject · zephyr 54 days ago low3.1 CVE-2026-16512 gptp_handle_msg() in subsys/net/l2/ethernet/gptp/gptp.c dereferenced the gPTP header returned by GPTP_HDR() and switched on hdr->message_type without first che… zephyrproject · zephyr 2026-09-18 low3.1 CVE-2026-14367 The I3C IBI subsystem in drivers/i3c/i3c_ibi_workq.c hands out statically-allocated work nodes through a free-list i3c_ibi_work_nodes_free implemented as a pla… zephyrproject · zephyr 2026-08-31 low3.1 CVE-2026-13480 The LoRaWAN TS004 Fragmented Data Block Transport handler frag_transport_package_callback() in subsys/lorawan/services/frag_transport.c parses downlink command… zephyrproject · zephyr 2026-08-26 low3.1 CVE-2026-13479 The LoRaWAN application-layer clock-synchronization service parses downlinks in clock_sync_package_callback() (subsys/lorawan/services/clock_sync.c). zephyrproject · zephyr 2026-08-26 low2.5 CVE-2026-11812 The UpdateHub management subsystem (subsys/mgmt/updatehub/updatehub.c) drives every update operation through a single file-scope ctx structure that holds the C… zephyrproject · zephyr 2026-08-10 low3.7 CVE-2026-11811 The UpdateHub over-the-air update client's start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-set… zephyrproject · zephyr 2026-08-10 low3.7 CVE-2026-11809 The UpdateHub OTA client in subsys/mgmt/updatehub/updatehub.c contains an out-of-bounds / uninitialized-memory read in z_impl_updatehub_probe(). zephyrproject · zephyr 2026-08-10 low3.6 CVE-2026-11742 The kernel queue helper z_queue_node_peek() in kernel/queue.c dereferences a node taken from a queue's data_q list, reading the node's flag byte and, for items… zephyrproject · zephyr 2026-08-07 low2.4 CVE-2026-10774 Zephyr's Bluetooth Mesh subnet key management leaks one PSA Crypto key slot on every subnet-key teardown. zephyrproject · zephyr 2026-08-02 low2.4 CVE-2026-10683 In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback… zephyrproject · zephyr 2026-07-27 low3.3 CVE-2026-10679 Divide-by-zero in DesignWare SPI driver reachable from spi_transceive syscall (local DoS) zephyrproject · zephyr 2026-07-21 low2.4 CVE-2026-10668 Host-triggerable control-endpoint wedge (DoS) in Nuvoton NuMaker HSUSBD UDC driver zephyrproject · zephyr 2026-07-12 low3.7 CVE-2026-10657 Out-of-bounds read in Zephyr DNS resolver mDNS suffix check (memcmp past string NUL) zephyrproject · zephyr 2026-07-05 low3.1 CVE-2026-10654 A race condition in the Zephyr Bluetooth Classic RFCOMM host stack (subsys/bluetooth/host/classic/rfcomm.c) mishandles a simultaneous bidirectional session dis… zephyrproject · zephyr 2026-06-30 low3.7 CVE-2026-10636 Use-after-free in Zephyr IPv4 IGMP send path (`igmp_send`) zephyrproject · zephyr 2026-06-16 low3.8 CVE-2026-0849 Malformed ATAES132A responses with an oversized length field overflow a 52-byte stack buffer in the Zephyr crypto driver, allowing a compromised device or bus … zephyrproject · zephyr 2026-03-16 low3.3 CVE-2020-13599 Security problem with settings and littlefs. zephyrproject · zephyr 2021-05-25 low2.5 CVE-2020-10066 Incorrect Error Handling in Bluetooth HCI core. zephyrproject · zephyr 2021-05-25 low3.8 CVE-2020-10065 Missing Size Checks in Bluetooth HCI over SPI. zephyrproject · zephyr 2021-05-25

Get notifications

Subscribe to new vulnerabilities and early warnings from the last seven days. Pick what matters to your stack and copy the address into any feed reader. More filters appear when you pick a type.

Format:
Open feed

Early warnings are advisories that are published before or without a CVE number, for example malicious packages, advisories with a CVE still pending and reports that are not reviewed yet. Confidence says how well an entry is checked: high, medium or low.

About this dashboard

The dashboard keeps its own index of security advisories and refreshes it every 30 minutes. It merges the national vulnerability database, package advisories, malware reports and the catalog of vulnerabilities that are exploited in the wild into one record per issue. Reports about the same flaw are combined, so nothing is listed twice.

Open any entry for the full record: description, severity vector, affected packages and versions, fixed versions, weakness class, exploitation probability and references.

Sources: the GitHub Advisory Database (reviewed advisories, malware reports and unreviewed reports), the National Vulnerability Database, the CVE Program (cve.org) for brand-new records, the OpenSSF malicious packages list, the CISA catalog of Known Exploited Vulnerabilities and Microsoft's blocklist of malicious VS Code extensions. Every entry names its sources on its detail page.

This product uses the NVD API but is not endorsed or certified by the NVD.

Reading the figures

  • Threat level: a rating computed from three numbers shown next to it: critical advisories in the last 24 hours, vulnerabilities newly confirmed as exploited this week and malware reports this week. It is a quick orientation, not an official warning level.
  • Severity: scores from 9.0 are critical, 7.0 to 8.9 high, 4.0 to 6.9 medium and 0.1 to 3.9 low. Severity describes how bad a flaw is in general. It does not know whether the component is reachable in your environment.
  • Known exploited: exploitation has been observed in real attacks. These are the entries to patch first. Entries with a fix deadline show how many days are left.
  • Early warnings: advisories that appear before or without a CVE number, for example malicious packages, reviewed advisories with a CVE still pending and reports that are not reviewed yet.
  • Priority queue: critical and high advisories of the last 7 days and everything newly exploited, ordered by exploitation status, severity and score.

Questions

Where does the data come from?
From public vulnerability databases, package advisories and the catalog of exploited vulnerabilities. NetSight collects them into its own index every 30 minutes and merges duplicates.
How do I check whether I am affected?
Search for your product or package name, open the record and compare your installed version with the affected and fixed versions. A product name alone does not mean your version is affected.
What does known exploited mean?
Exploitation of this vulnerability has been observed in real attacks. Such entries carry a date they were confirmed and, where one exists, a deadline for applying the fix.
What is an early warning?
An advisory that is published before or without a CVE number, such as a malicious package or a reviewed advisory whose CVE is still pending. They give you a head start, but the details can change.
Is a high severity always more urgent than a low one?
No. Severity measures technical impact in general. Exposure of the affected system, observed exploitation and the exploitation probability matter as much.
Can I follow new advisories automatically?
Yes. Use the notification builder further down to create an RSS, Atom or JSON feed filtered by severity, technology, ecosystem or exploitation status.